User manual KENWOOD KDV-5241U

[. . . ] When connecting with the USB cable Operations using the control screen Listening to the other external components 32 Selecting a preset sound mode 34 General settings -- PSM 36 Disc setup menu 40 More about this unit 42 Troubleshooting 49 Specifications 53 Operations using the control panel Selecting a folder/track on the list (only for MP3/WMA/WAV file) Operations using the remote controller Operations using the on-screen bar Operations using the control screen Operations using the list screen To prevent injury or fire, take the following precautions: ⷠTo prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ⷠDo not watch or fix your eyes on the unit's display when you are driving for any extended period. If you need to operate the unit while driving, be sure to look around carefully. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. [. . . ] ⷠBy holding 5/, you can fast skip in every layer of the main menu. 3 Elapsed playing time of the current track 4 Operation mode icon ( 3, 7, 8, ¡, 1 ) 5 Current track number/total number of tracks 6 Track information 7 Track list with the current track selected If a track is selected, playback starts automatically. ⷠIf the selected item has another layer, you will enter the layer. 3 Select a search mode category, then the desired To return to the previous search mode screen, press MENU. * Functions only if you select "All Albums" or "All" in "Albums" of the main "MENU". You can also change the settings from the PSM (Preferred Setting Mode) items. Listening to the other external components Preparation: Make sure to connect and turn on the monitor to watch the playback picture. 5 mini plug cable (male ­ male) are used, a noise may be generated during source switching. * Portable Video/Audio player of this pin-allocation can be connected: 1 Audio (R) Video GND 2 GND GND 3 Video Audio (R) Audio (R) 4 Audio (L) Audio (L) Audio (L) Camcorder iPod, etc. You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). If "Bypass" is selected, you can listen to the original sound mode recorded. ⷠWhen is shown on the display, you can move back to the previous screen by pressing number button 3 or 6. A Fad/Bal (Fader/Balance) 1 Press number button 1 ( ) to move to the "Fad/Bal" adjustment display. 2 Adjust the speaker output balance by pressing: 5 / : between the front and rear speakers. [L6 to R6] B Subwoofer 1 Press number button 1 ( ) to move to the "Subwoofer" adjustment display. [0 to 8] 4 Press number button 1 ( ) to move to another setting level. * If "Off" is selected in step 2, you can only adjust the subwoofer phase. D VolAdjust, [­5 to +5] Turn the control dial to adjust the input level of each source (except FM). ⷠBefore making an adjustment, select the source you want to adjust. e Loudness , [Off or On] Turn the control dial to select "Off" or "On". When "On" is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level. 1 Press 4 /¢ to select the frequency band, then press 5 / to enhanced level for the selected frequency band. [. . . ] About sounds reproduced through the rear terminals When playing a multi-channel encoded disc, multi-channel signals are downmixed. Through DIGITAL OUT (optical): Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. ) To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set "DIGITAL AUDIO OUTPUT" correctly. When playing a multi-channel encoded disc, multi-channel signals are downmixed. [. . . ]