User manual KENWOOD DDX712

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD DDX712. We hope that this KENWOOD DDX712 user guide will be useful to you.


KENWOOD DDX712 : Download the complete user guide (798 Ko)

You may also download the following manuals related to this product:

   KENWOOD DDX712 (305 ko)

Manual abstract: user guide KENWOOD DDX712

Detailed instructions for use are in the User's Guide.

[. . . ] € Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. € If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. € If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating. [. . . ] 31 1:34:41 PM Connection Ignition key switch ACC If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. A B A B C Ignition wire (Red) Battery wire (Yellow) Ground wire (Black) (To car chassis) Antenna Cord FM/AM antenna input Car fuse box Car fuse box (Main fuse) C Battery Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. Parking sensor wire (Light Green) PRK SW For the sake of safety, be sure to connect the parking sensor. Connect to vehicle's reverse lamp harness when using the optional rear view camera. To steering remote To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. To car light control switch Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power control terminal. " terminal of the amplifier having the external amp control function. Reveres sensor wire (Purple/White) Steering remote control input (Light Blue/Yellow) Dimmer control wire (Orange/White) Mute wire (Brown) Motor antenna control wire (Blue) Power control wire (Blue/White) External amplifier control wire (Pink/Black) If no connections are made, do not let the cable come out from the tab. CONT + To front right speaker + To rear left speaker Purple/Black P CONT Purple + To rear right speaker EXT. Accessory 2 Accessory 3 Accessory 4 AV OUT ■ Audio/Video Output • Video output (Yellow) • Audio left output (White) • Audio right output (Red) ■ Audio/Video Input1 • Video input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Rear View Camera Input • Video input (Yellow) ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer Preout • Audio left output (White) • Audio right output (Red) RELAY 2 RELAY 1 SUB WOOFER REAR FRONT REAR VIEW CAMERA AV IN1 To Relay Box 6 | DNX7120/DDX712/DDX7032 DNX_DDX7_insta_K_En_r1. 31 1:34:43 PM Optional Accessory Connection iPod (commercially available) To GXM30/ GTM10 When connecting the XM Tuner GXM30 (optional accessory) or TMC Tuner GTM10 (optional accessory), put the cable clamper (accessory $) to the back of this unit first, and then wire the cable through the clamper. Audio Output (Black) Audio Input KCA-iP300V (Optional Accessory) Accessory 5 Video Output (Yellow) Video Input Accessory $ USB terminal USB terminal To SIRIUS Satellite Radio tuner/ XM Satellite Radio tuner/ HD Radio tuner/KCA-BT200 (Optional Accessory) Conversion adapter (Optional Accessory) may be necessary for connection of Optional Accessory. Navigation System Input (DDX712/DDX7032 only) TV Tuner (Optional Accessory) TV ANTENNA INPUT Navigation System (Optional Accessory) Connection cable (Included in the TV tuner) Connection cable (Included in the Navigation System) DNX_DDX7_insta_K_En_r1. 31 1:34:43 PM Installing the GPS Antenna (DNX7120 only) GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. Peel the backing off of the adhesive on the bottom of the metal plate (Accessory #). [. . . ] Self-tapping screw (commercially available) Metal mounting strap (commercially available) Make sure that the unit is installed securely in place. Engage the catch pins on the removal tool 6 and remove the two locks on the lower level. Remove the hard rubber frame by referring to the removal procedure in the section <Removing the Hard Rubber Frame>. Remove the Hex-head screw with integral washer (M4 × 8) on the back panel. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD DDX712




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD DDX712 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.