Detailed instructions for use are in the User's Guide.
[. . . ] DVD DIGITAL CINEMA SYSTEM
TH-A30R
Consists of XV-THA30R, SP-XA30, SP-XSA30 and SP-WA30
STANDBY/ON AUDIO
TV
VCR
TV/VIDEO
RDS DISPLAY
DISPLAY
STEP
TV CHANNEL
AUDIO/ FM MODE SUBTITLE
TV VOLUME
DVD
FM/AM
AUX
VCR CONTROL
TUNER PRESET DOWN REW VCR CHANNEL TUNING B. SEARCH F. SEARCH UP FF
ENTER
VOLUME TOP MENU MENU RETURN MUTING
STANDBY AUDIO/FM MODE STANDBY/ON DSP VOLUME SOURCE
DVD DIGITAL CINEMA SYSTEM TH-A30R
DIGITAL
SURROUND
DIGITAL
RM-STHA30R
DVD CINEMA SYSTEM
INSTRUCTIONS
For Customer Use: Enter below the Model No. Serial No.
LVT0945-010B
[B]
Warnings, Cautions and Others
IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] Each output balance changes from OFF (silence), 06 (most reduction) to 00 (no reduction).
3) Repeat 1) and 2) for setting the other speakers.
1 2
Press AUX to select the external component as the source. Start playing a source encoded with Dolby Surround.
AUX
22
5
To adjust the output level for the center speaker, the rear speakers, and the subwoofer. 1) Press SOUND repeatedly to select the SOUND "CEN, " "REAR, " or "SW. "
Each time you press the button, the indication on the display changes as follows:
Adjusting DSP Modes
You can adjust the following settings while activating DSP modes. It is recommended that you make adjustments from your actual listening point while listening to reproduced sounds. Output balance for the front speakers Output balance for the rear speakers Output level for the rear speakers Output level for the subwoofer DSP modes cannot be used with Dolby Surround. Once one of DSP modes is activated, Dolby Surround in use will be canceled. When you play back a DVD encoded with Dolby Digital or DTS Digital Surround, DSP MODE button (or DSP button on the center unit) does not work. If the setting is canceled before you finish, start from step 2 again.
00 F 00
00 R 00 SW
CEN REAR
Normal indication (canceled)
CEN (Center) REAR
: To adjust the output level for center speaker (from 6 dB to +6 dB). : To adjust the output level for rear speakers (from 6 dB to +6 dB).
SW (Subwoofer) : To adjust the output level for subwoofer (from 6 dB to +6 dB). When selecting "3 STEREO, " you cannot adjust the output levels for the rear speakers. "CEN 0dB, " "REAR 0dB, " and "SW 0dB" are the initial settings. If you have already changed the settings, another value will appear.
1 2
Select and play any source except Dolby Digital or DTS Digital Surround. Press DSP MODE (or DSP on the front panel) repeatedly to select the desired DSP mode.
DSP MODE
2) Press 3 or 2 to adjust the output level.
3 : Increases the output level. 2 : Decreases the output level.
ENTER
The DSP indicator lights up on the display while the DSP modes are activated. Each time you press the button, DSP mode changes as follows:
3) Repeat 1) and 2) for setting the other speakers.
THEATER Normal indication (canceled)
HALL
LIVE CLUB
DANCE CLUB
Now, you are ready to start the adjustment. To adjust the output balance for the front speakers and the rear speakers, go to the next step. To adjust the output level for the rear speakers and the subwoofer, go to step 4 on the next page.
TO BE CONTINUED ON THE NEXT PAGE
23
Creating Realistic Sound Fields
4
REW VCR CHANNEL TUNING B. SEARCH F. SEARCH FF
To adjust the output level for the rear speakers and the subwoofer. SOUND 1) Press SOUND repeatedly to select the "REAR" or "SW. "
Each time you press the button, the adjustment indication on the display changes as follows:
23
ENTER
00 F 00
VOLUME TOP MENU MENU RETURN MUTING
00 R 00 SW
CEN REAR
Normal indication (canceled)
SOUND REAR
SOUND
1
PTY
2
PTY SEARCH
3
PTY +
SETTING
4 7
SLOW
5 8 0
6
PRO LOGIC
: To adjust the output level for rear speakers (from 6 dB to +6 dB).
9
SETUP TEST
ANGLE
ZOOM
D. R. C
DSP MODE
SW (Subwoofer) : To adjust the output level for subwoofer (from 6 dB to +6 dB). If you have already changed the setting, another value will appear.
REPEAT
A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
2) Press 3 or 2 to adjust the output level.
3
To adjust the output balance for the front speakers and the rear speakers 1) Press SOUND repeatedly until one of the following adjustment indications appears on the display.
3 : Increases the output level. 2 : Decreases the output level.
SOUND
ENTER
3) Repeat 1) and 2) for setting the other speakers.
Each time you press the button, the adjustment indication on the display changes as follows:
00 F 00
00 R 00 SW
CEN REAR
Normal indication (canceled)
00 F (Front) 00 : To adjust the output balance for the front speakers. "00 F 00" and "00 R 00" are the initial setting (the output balances are at the center position). If you have already changed the setting, another value will appear.
2) Press 3 or 2 to adjust the output balance.
3 : Decreases the left speaker ENTER output, or restores the right speaker output. [. . . ] To operate the other products, aim the remote control directly at the remote sensor on the target product.
To change the transmittable signals for operating a TV
1. : Set the input mode (either TV or VIDEO)
STANDBY/ON AUDIO
TV VOLUME +/ TV/VIDEO
TV/VIDEO RDS DISPLAY
TV TV CHANNEL +/
TV
VCR
TV/VIDEO TV VOLUME +/
DISPLAY
STEP
TV CHANNEL
TV CHANNEL +/ : Change the channels. If there are more than one code listed for your brand of TV, try each one until the correct one is entered. Manufacturers' codes for TV Manufacturer Codes 01 12 12 09, 17, 21 11, 13, 14, 24 02, 16 23 13, 14, 24 08, 23 27 02, 20, 22 13, 14, 22 24 03 06, 32 12, 16 12 10, 31 15, 16 14, 24, 28 13, 14, 24, 33, 34 07, 16 19, 21
AUDIO/ FM MODE SUBTITLE
TV VOLUME VCR CONTROL
DVD
FM/AM
AUX
TUNER PRESET DOWN REW VCR CHANNEL TUNING B. SEARCH F. SEARCH UP FF
ENTER
VOLUME TOP MENU MENU RETURN MUTING
Number buttons
SOUND
1
PTY
2
PTY SEARCH
3
PTY +
SETTING
4 7
SLOW
5 8 0
6
PRO LOGIC
9
SETUP TEST
ANGLE
ZOOM
D. R. C
DSP MODE
REPEAT
A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
JVC Akai Fisher Grundig Hitachi Mitsubishi Nokia Nordmende Panasonic Philips Saba Samsung Sanyo Schneider Sharp Sony Telefunken Thomson Toshiba
Manufacturers' codes are subject to change without notice. [. . . ]