User manual JOBO PHOTO DISPLAY QUICK START GUIDE

[. . . ] Preparing to use photoGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6. Capturing Locations with photoGPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7. Geotagging with photoGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 8. Modifying the Location Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 9. [. . . ] The camera time can be changed between batches of photos, if required e. g. Geotagging with photoGPS Geotagging your photos is simple, using the photoGPS software. Next, connect your photoGPS to the computer via USB and run the application software. On the left hand side is the GPS data pane, which is used to configure your photoGPS, to transfer/delete the GPS data captures from the device and to show the resulting location information. On the right hand side is the Photos Pane, which is used to select the source (original images) and destination folders (tagged images) and to display/edit the location information for each image. GPS Data Pane Photos Pane There are a number of options and settings that control the operation of the photoGPS software. These are explained later in this guide, but here we describe the simplest workflow using the default options. -6- 1. Press the `Import GPS Captures' button on the Capture Device tab. The GPS captures will be downloaded from the device and processed to determine their locations. When this is successful, the resulting GPS position fix information is displayed in green (time/latitude/longitude/altitude). The photoGPS software will perform several passes, retrying the captures that originally produced failed fixes, as these can sometimes be turned into successful fixes by using information from other fixes. In addition, the application performs reverse geocoding, to try to provide an address for each capture (street/town/country). 2. The typical workflow is to geotag your photos, as described earlier in the guide, then use this button to delete the captures from the device ready to start taking new photos. If you want to archive your GPS capture data you can bring up the `Options' window (via the Tools -> Options menu) and select the `GPS Data' tab. Here you can choose a folder that captures will be copied to when importing from the device. - 12 - By default, this option will not automatically delete captures from the device; you will need to do this using the `Erase All Data' button, if required. However, you can change this by ticking the `Auto Erase on Import' checkbox, which is accessed via the `Advanced Settings' button in the device window. It may be that your photoGPS is becoming full but you are unable to geotag your photos and delete the GPS data captures because you do not have internet access. In this case you can use the Tools > Download Data menu item to save the captures to your computer without trying to process them to obtain position information. The saved captures can then be erased from the photoGPS and a new set of photos/captures taken. To use the saved GPS data captures for geotagging, instead of the ones on the photoGPS, simply select the `Import From Folder' tab in the GPS Data Pane, choose the desired folder and press the `Import GPS captures' button. 11. Photo Metadata Options Select the Tools -> Options menu item and then click the `Photos' tab, to set the photo metadata options. By default, photoGPS writes location metadata into XMP sidecars for RAW images, but embeds it directly into JPEG image files. - 13 - This tab also allows for a custom copyright message to be specified. If the checkbox is ticked, this copyright message will automatically be added to the Copyright field of all geotagged photos. 12. Language Selection The Tools -> Language menu option allows the user to change the language used by the photoGPS user interface. Supported languages are: English, German, French, Italian and Spanish. 13. [. . . ] If you think the battery may be low, recharge by connecting to a computer using the UB cable. If the device is becoming full, either process and delete the captures as normal or offload the captures for later processing. Either process and delete the captures as normal or offload the captures for later processing. To set the clock automatically, connect the device to a computer and run the photoGPS application (whilst connected to the internet) Continue to use Contact Jobo None (when pressing the GeoHint button) GR It is likely that the photoGPS battery is flat Capture successful, but getting low on battery or memory (<20%) GRR GRRRR Capture aborted due to error Out of memory GRRRRRRRR Device clock not set RRRR pause GG Flashing Red Reset /clear started . . . [. . . ]