User manual JOBO GIGA ONE ULTRA

[. . . ] GigaOne Ultra comes equipped with an internal Li-polymer rechargeable battery. The battery can be charged either with an external AC adapter or via the USB port when connect to the PC or notebook. 4 GB General remarks 1. Liability The manufacturer only guarantees suitability for the original purpose of this product. Furthermore the manufacturer cannot be held responsible for the damage of data. [. . . ] In order to prevent short circuits and electrical discharges you must avoid exposing this product under all circumstances to water, rain or moisture. the device should be treated like a laptop and not made to go through an X-ray machine or other control systems. Do not switch on GIGA ONE ULTRA above an altitude of 3, 000 m above sea level. The hard disk could be damaged by this and as a result data could be lost. 7 1. 3. Scope of delivery The package contains the following parts: - JOBO GIGA one ultra - integrated battery - integrated hard disk - AC power adapter - driver CD including software - USB cable - manual - light bag 1. 4. Charging the battery The device has an integrated Li-Ion battery with 1300 mAh. Please, charge the battery once completely for 12 hours before the first use by way of the mains adapter supplied with GIGA ONE ULTRA. Only use the original mains adapter that comes with the device for charging. If the GIGA ONE ULTRA is connected to a computer the charging is effected via the USB cable as long as the computer is switched on. Since the battery is a Li-Ion battery the so-called memory effect is eliminated, which means you can recharge the battery to be on the safe side when it is still half full. The charging level of the battery is indicated by the battery symbol in the display. The battery must not be exchanged by anyone other than the manufacturer. 8 GB 1. 5. Buttons Key This section gives a briefly overview of the buttons on the GIGA one ultra. Activation Press & Hold Press & Hold Press once Press Copy Operation Power On Power Off. Select Copy or Delete mode Copy memory card to Hard disk in Copy mode Delete memory card in Delete mode Select 1. 6. LED Indication LED Definition Card access HDD access Indication Memory card is accessed Hard disk is accessed 1. 7. Connectors (see drawing on page 2) Type CON1 CON2 CON3 CON4 CON5 Definition DC jack Mini USB connector Memory Card connector CF Card connector Memory Card connector Purpose DC source +5V @ 1A Connect to PC or Notebook USB 1. 0 or 2. 0 port Memory Card slot (SD/SDHC/MMC/ MS/MS-PRO/xD) Compact Flash memory card slot Memory Card slot (MiniSD/MS Duo/MS Pro Duo) 9 1. 8. Buttons and Switch Description Key Activation Press Hold Power / Select Press Copy / Execute Standalone Operation Mode USB / Standalone Description - Press and hold this button for a second to power-up the device. - Press and hold this button for few seconds, release the button to power down the device. COPY / DELETE Mode 2. 1 Copy Memory card to HDD Turn on the GIGA one ultra by pressing the ON button. Then the COPY sign blinks in the display, by pressing the COPY button you initiate the copy process. During copying, the content of the memory card is copying to the hard disk. [. . . ] If you find that the methods of use and the settings are not the same as in the manual please visit our website to check the latest product information. - Do not use the product under adverse conditions like excessive heat, cold, dust, humidity, etc. - Keep it out of the reach of children, avoid it being struck or dropped - Please do not change the battery by yourself!CAUTION: The battery may explode and hurt people 17 - When you use the product do not allow it to fall or collide with other object otherwise the cover, battery or other parts may be damaged. [. . . ]