User manual JOBO GIGA MINI

[. . . ] Using wrong power adapters can destroy the GIGA mini! 10. - - Switch on/off GIGA mini Press button ­ display turns to cool blue and shows "Jobo - For your best Image" claim for 2 seconds. For saving energy the colour backlight of the display is switched off after 10 seconds, and the whole device is switched off after 30 seconds when not in use. Bedienungsanleitung ( 86 548) Stand: 28. 07. 05 Seite: 4 von 15 Quick guide GIGA mini 11. Short instructions Download from Flash Card switch on GIGA mini Insert flash card - Button 2 Button Display shows OK Display shows NG Warning ­ save flash card before reformat ! [. . . ] Please close and save all current programs on Mac before using device. Connect GIGA mini with AC power adapter ( do not switch on GIGA mini ). After selecting folder , , UNTITLED" connection between devices via USB is ready. Disconnect devices while putting , , UNTITLED" folder in the recycle bin. 13. 2 MAC (9. 0 - 9. 6) ­ special driver required per download from www. jobo. com Important notice Never copy files back on GIGA mini which have names with special symbols or more than 128 letters. For driver installation select , , INSTALLER" and follow the instructions. - Disconnect devices while putting , , UNTITLED" folder in the recycle bin. 14. Download from Flash Card (without PC) Insert flash card in the right card slot. Switch on Giga mini and display shows symbol of inserted flahs card in the left upper corner (CF, SD, MS, SM) and activated FILE management. - Press 2 button to start (CF ->HD) ( 86 548) datatransfer, the symbols will be shown as followed: Dislay 1 COPYING Bedienungsanleitung Stand: 28. 07. 05 Seite: 7 von 15 All disc to HD Please wait Disc Initialing Display 2 COPYING - (CF ->HD) Copyed Dir - 0XX Copyed File - 0XX Copying . . . . . XX% Display 3 COPYING - (OK) Copyed Dir - 0XX Copyed File - 0XX Enter -> (SURE) - (ransfer to HDD) (number of folder) (number of files) (processing in % -per file) ( confirmation of transfer) (number of copied folder) (number of copied files) (back to main menu) Reformat flash card in you camera. All data will be copied on Giga mini 1:1, so that the device is able to save all kind of data - even RAW formats of all cameras, all Mac and PC files etc. Verify: This feature is available after running a firmware upgrade under www. jobo. com. The verify function compares the file size of the copied data with the data from the source to render maximum security. 14. 1. - Data transfer failed (no good) if display shows failure during data transfer: COPYING - (NG) Copied Dir - 000 Copied File - 000 Enter -> (SURE) ( Failure) (number of copied folders) (number of copied files) (back to main menu) 14. 2 - Do not erase data on flash card before they have been saved on Mac/PC first. The following will be displayed: COPYING - (NG) Copyed Dir - 00X Copyed File - 00X Enter -> (SURE) ( Failure) (number of folder) (number of files) (back to main menu) 14. 3 - Directory of copied files with every download from flash card the GIGA mini creates a folder containing the data from the flash card. Folders are named with numbers starting from 1 to 9999 and the type of flash card as a pre-fix, e. g. . CF and Micro Drive CF0001 ­ CF9999 SD and MMC SD0001 - SD9999 SM SM0001 ­ SM9999 MS MS0001 ­ MS9999 ( 86 548) Stand: 28. 07. 05 Seite: 8 von 15 Bedienungsanleitung 15. HDD full/ reformatting Giga mini when hard disk is full, please save data completely on another HDD and reformat GIGA mini. 15. 1 Reformat Hard Disk Press ESC button in the main menu and function DISC SELECT is activated. Select data source using or button and confirm using 2. In this menu you can select data source to copy reformat or to execute function FDISC. Select Copy" to copy files or folders from flash card to hard disk. When Driver Format" is selected, data source is ready to be reformatted. 16. 1 Data management Select data source To display different files select first symbol in the main menu (HDD or flash card). Bedienungsanleitung ( 86 548) Stand: 28. 07. 05 Seite: 9 von 15 Press ESC button and select data source using button press to enter Press to display file names. The first two files show system files from MS card. . Select , , PIC" folder to see file names of 5 JPG files. 16. 2 Manage data Press 2 button to select manage mode for data. [. . . ] OTG Function - will be available in January 2005 at www. jobo-digital. de free firmware update. 22. Which data formats could be All data and formats could be downloaded downloaded on HDD?System failure - Press RESET button (see back of device) No hard drives are shown when 1. [. . . ]