User manual JOBO GIGA 2

[. . . ] With just one touch, photos on the memory card can be easily stored on the Giga One. System requirements - Microsoft Windows 98/ ME/ 2000/ XP, MacOS 10. 2 or higher, Linux 2. 4. x or higher - CD- ROM drive - Pentium 2, 400 MHz - RAM 32MB ( Windows ME, 2000 ) ­ 64 MB ( Windows XP ) - 20MB HDD - USB port 6 GB 2. Installing the driver software Windows 98/98SE The driver provided on the CD is required only for Microsoft Windows 98. After software installation is completed, turn on GIGA 2 and connect it to the computer using the USB cable provided. [. . . ] Important: You must first complete the installation of GIGA 2 software from CDROM disk provided before you connect the Giga One to your Win98 computer. Windows ME/ 2000/ XP/ 2003, Linux 2. 4. x, MacOS 10. 2. x No software setup is needed. Windows 2000 must have at least Service pack 3 installed, and Windows XP must have at least Service Pack 1 installed. 7 2. 2. Left click on the `Unplug or Eject Hardware` or `Safely Remove Hardware` icon in the Windows system tray ( green arrow icon on right of your task bar ). Select `stop USB Mass Storage Device`( for Windows 2000 ) or `Safely Remove USB Mass Storage Device` ( for Windows XP ) and confirm. Left click on the `Unplug or Eject Hardware` icon in the Windows system tray ( green arrow icon on right of your task bar ). Select `stop USB Disk- Drive ( F: ) ` ( or the appropriate drive letter ) and confirm. The GIGA 2 appears as three separate drivers in this Windows ME system tray icon, so go through steps 1 and 2 two more times until all three drives are disconnected. Open `My computer Control Panel System Device Manager`, right click on the GIGA 2 and select `remove`, then disconnect your GIGA 2. Note: Unplug the USB cable only when prompted or there is no data transfer evident. Doing so may result in damage to the Giga One that is not covered under warranty. If internal battery is too weak during copying sequence, the process will terminate. Re-charge the battery or connect the AC power adapter and redo the last copy as described in 3. 5. 2. 7. Using the GIGA 2 as an External Hard Disk Connect GIGA 2 to the computer USB port and turn it on afterwards. The GIGA 2 will appear in the My Computer folder as four devices: One local hard disk (this is the GIGA 2 internal hard disk) and three removable drives (the first is the CF card reader and the second is the SD/ MMC/ MS the third is SM card reader). You can now access your files on the GIGA 2 hard disk and the CF and SD/ MMC/ MS/ SM cards through your computer. 11 2. 8. GIGA 2 re-format for hard disks GIGA 2 is a hard disk based product. Please use the program delivered on CD with English manual or the software with multilingual indications at www. jobo. com. 12 GB 3. If there is a faulty GIGA 2 which meets with our limited warranty JOBO can either arrange for the repair or replacement of the GIGA 2 at our option. We have no responsibility to replace the GIGA 2 if it is damaged by accident, abuse or misapplication. [. . . ] JOBO shall have no liability for lost data, regardless of the cause, recovery of lost data or the consequences from any loss of data. Under no circumstance shall JOBO or our dealers be liable for any incidental, special or consequential damages that result from the use of the GIGA 2 or related documentation, including any kind of damage or loss of property, financial loss or loss of data. In no event shall our total liability to you for all damages, losses, and causes of action exceed the amount paid by you for the GIGA 2. The following cases are charged for service regardless of the term of guarantee: - Malfunction after exceeding the warranty period. [. . . ]