User manual HP LASERJET 9050MFP

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP LASERJET 9050MFP. We hope that this HP LASERJET 9050MFP user guide will be useful to you.


HP LASERJET 9050MFP : Download the complete user guide (4822 Ko)

You may also download the following manuals related to this product:

   HP LASERJET 9050MFP (1310 ko)
   HP LASERJET 9050MFP Quick Start (7198 ko)
   HP LASERJET 9050MFP Software Guide (5987 ko)
   HP LASERJET 9050MFP Quick Reference (530 ko)
   HP LASERJET 9050MFP Supplementary Guide (2097 ko)
   HP LASERJET 9050MFP Frequently Asked Questions (2353 ko)

Manual abstract: user guide HP LASERJET 9050MFP

Detailed instructions for use are in the User's Guide.

[. . . ] hp LaserJet 9040mfp hp LaserJet 9050mfp use hp LaserJet 9040mfp/9050mfp User Guide Copyright and License © 2004 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Pull out and lift the green tab. 4 5 Remove any media from this area by pulling it out of the MFP. Push the green lever down to the original position. 6 Close the right door. To clear jams in Trays 2 and 3 1 Open the tray until it stops. 2 Check for media in the tray area, and remove any media from this area. Carefully check to be sure you have removed all pieces of torn media. 124 Chapter 10 Problem solving ENWW 3 Close the tray. 4 Open and close the right door to reset the MFP. To clear jams in Tray 4 1 Open the vertical transfer door on Tray 4. 2 Check for paper in this area, and remove any paper from this area. Carefully check to be sure that you have removed all pieces of torn paper. ENWW Clearing jams 125 3 If you did not see any paper in the vertical transfer door, open Tray 4. 4 5 Check for paper in the tray area, and remove any paper from this area. Close Tray 4. 6 Close the vertical transfer door. 126 Chapter 10 Problem solving ENWW Clearing jams from the duplex printing accessory (duplexer) To clear jams in the duplex printing accessory 1 Move the output device away from the MFP to gain access to the left door. 2 WARNING! Open the left door and carefully pull out any paper from area. Avoid touching the adjacent fusing area. It can be hot. 3 Remove the duplex printing accessory by pressing the green lever and pulling the unit out until it stops. 4 Remove any paper by lifting the two green levers in the duplex printing accessory. ENWW Clearing jams 127 5 Open the front door. 6 Check for paper in the duplex printing accessory area, and remove any paper by pulling it out of the MFP. Be careful not to tear the paper. 7 Reinstall the duplex printing accessory by sliding it back into the slot until it locks into place. 8 Close all open doors. Push the output device back into place. 128 Chapter 10 Problem solving ENWW Clearing jams from the output areas To clear jams in the stacker or stacker/stapler 1 If the jam extends into the output bins, slowly and carefully pull the media straight out of the MFP so that it does not tear. 2 Move the output device away from the MFP. 3 On the stacker, lift the wire on the lower bin of the device, and carefully pull out any media from this area. On the stacker/stapler, carefully pull out any media that might be protruding from the accumulator area. Note Only the stacker has the wire on the lower bin. ENWW Clearing jams 129 4 Locate the green handle in the flipper area and lift the handle. 5 Carefully pull out any media from the flipper area. WARNING! Avoid touching the flipper area. 6 Locate the green handle in the paper path module, and then pull down on the handle. 7 Carefully pull out any media from the paper path module. 130 Chapter 10 Problem solving ENWW 8 Close all open doors. Push the output device back into place. To clear jams in the multifunction finisher 1 Open the finisher cover. 2 Slowly and carefully pull the paper straight out of the finisher so that it does not tear. ENWW Clearing jams 131 3 Close the finisher cover. 4 Move the finisher away from the MFP. 5 Carefully remove any paper from the MFP output area. 6 Carefully remove any paper from the finisher input area. 132 Chapter 10 Problem solving ENWW 7 Open the stapler-unit door. 8 To clear a booklet jam, turn the bottom green knob clockwise to remove the booklet. 9 Close the stapler-unit door. 10 Push the multifunction finisher back into place. ENWW Clearing jams 133 To clear jams in the left door (fuser area) 1 Move the output device away from the MFP to gain access to the left door. 2 WARNING! Open the left door. Avoid touching the adjacent fusing area. It can be hot. 3 4 Remove any jammed or damaged media from this area by pulling it out of the MFP. Be sure to remove all pieces of torn media. 134 Chapter 10 Problem solving ENWW 5 Close the left door. Push the output device back into place. To clear a staple jam from the stacker/stapler 1 Move the stacker/stapler away from the MFP. 2 Open the stapler unit door. ENWW Clearing jams 135 3 Pull the cartridge out. 4 Pull up on the lever labeled with a green dot. 5 Remove the damaged staple. 6 Press down on the lever labeled with a green dot. 136 Chapter 10 Problem solving ENWW 7 Reinstall the staple cartridge. 8 Close the stapler unit door. 9 Push the stacker/stapler back into place. Note The stapler needs to reload after clearing a staple jam, so the first few documents (no more than five) might not be stapled. If a print job is sent and the stapler is jammed or is out of staples, the job will still print as long as the path to the output bin is not blocked. ENWW Clearing jams 137 To clear a staple jam from the multifunction finisher 1 Open the stapler-unit door. 2 Slide the stapler-unit toward you. 3 Turn the large green knob until the blue dot appears in the window of the stapler unit. 138 Chapter 10 Problem solving ENWW 4 Turn the small green knob at the top of the stapler unit clockwise until the staple cartridge moves to the left of the stapler unit. CAUTION The blue dot must appear in the window of the stapler unit before you remove the staple cartridge. If you try to remove the staple cartridge before the blue dot appears in the window, you could damage the finisher. 5 Remove the staple cartridge by squeezing the blue tabs together. 6 Pull up on the lever labeled with a green dot. ENWW Clearing jams 139 7 Remove the damaged staple. 8 Press down on the lever labeled with a green dot. 9 Reinstall the staple cartridge until it clicks into place. 10 Slide the stapler unit into the finisher. 140 Chapter 10 Problem solving ENWW 11 Close the stapler-unit door. In rare instances, a staple jam might occur in the upper half of the stapler head. 1 2 Follow steps 1 through 4 for clearing a staple jam from the multifunction finisher (see To clear a staple jam from the multifunction finisher). Locate the damaged staple at the back of the stapler unit, and then remove the staple. 3 Follow steps 10 through 11 for clearing a staple jam from the multifunction finisher (see To clear a staple jam from the multifunction finisher). ENWW Clearing jams 141 To clear jams in the 8-bin mailbox Note Check that the paper used is not thicker than the 8-bin mailbox supports. To do this, stand on the left side of the MFP and pull the 8-bin mailbox straight toward you. 2 3 Carefully remove the upper (face-up) bin. Pull down the handle on the output paper module and remove any jammed paper from this area. 4 Push the 8-bin mailbox back into place, and then reattach the upper bin. 142 Chapter 10 Problem solving ENWW Solving repeated jams Situation General repeated jam problems Solution 1. Check to see that the media is correctly loaded in the trays and that all width guides are correctly set (see Printing). Make sure that the paper tray is set for the size of media installed and that the tray is not overloaded. [. . . ] To change these settings click the General tab, and then click Accessibility. ALT+F4 ALT+TAB ALT+O ALT+O, and then press I ALT+O, and then press T ALT+O, and then press P, or right-click in the topic and click Print ALT+LEFT ARROW, or ALT+O, and then press B ENWW Using F6 to switch between the Navigation and Topic Panes 239 To move forward to the next topic (provided you have viewed it just previously). To refresh the topic that appears in the Topic pane (this is useful if you have linked to a Web page). To return to the home page (help authors can specify a home page for a help system). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP LASERJET 9050MFP




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP LASERJET 9050MFP will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.