User manual HITACHI TRAVELSTAR 7K200

[. . . ] Quick Installation Guide Hitachi Travelstar 7K200 Models: HTS722020K9A300 HTS722016K9A300 HTS722012K9A300 HTS722010K9A300 HTS722080K9A300 HTS722020K9SA00 HTS722016K9SA00 HTS722012K9SA00 HTS722010K9SA00 HTS722080K9SA00 Handling precautions Set the drive down gently to prevent damage from impact or vibration. [. . . ] In particular, prevent vibration or shock generated by dropping, knocking over or hitting the drive. Also, avoid touching the electrical components directly, which can discharge electrostatic energy and damage the drive. Page 1 version 1. 0 Hitachi Global Storage Technologies Mounting Recommendations · · · The temperature of the center of the hard drive cover should remain less than 65°C at all times. The inertia of the chassis around the Z-axis of the gravity center of the device must be more than 3 x 10-4kg m2. In case of general Sub-notebook PC weight (1. 7kg), the inertia of the chassis around the Z-axis of the gravity center of the device is greater than 100 x 10-4 kg m2. Therefore, the required inertia level does not conflict with the general electronic equipment. If installing the 7K200 next to a steel plate, the cover of the 7K200 and the steel plate must have at least 2mm of space between them. The PCBA side of the drive should be covered with insulation if it is in contact with any metal part of the host system. The blue frame shown below represents the casing used when the drive can not be secured with screws. · · · Page 2 version 1. 0 Hitachi Global Storage Technologies Interface connector Mounting Solution Company: E-A-R Page 3 version 1. 0 Hitachi Global Storage Technologies © Copyright Hitachi Global Storage Technologies Hitachi Global Storage Technologies Produced in the United States 5/07 All rights reserved TravelstarTM is a trademark of Hitachi Global Storage Technologies. [. . . ] Information is true as of the date of publication and is subject to change. [. . . ]