User manual HITACHI SV 13YB LV

[. . . ] CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or may cause machine damage. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. (2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. (3) Keep bystanders children, and visitors away while operating a power tool. [. . . ] Don’t force small tool or attachment to do the job of a heavy-duty tool. Don’t use tool for purpose not intended —for example— don’t use circular saw for cutting tree limbs or logs. NEVER use a power tool for applications other than those specified in the Instruction Manual. NEVER allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel. Cracks in the tool’s housing or handle can lead to electric shock. Blades, cutting implements and accessories which have been mounted to the tool should be secure and tight. The tool’s motor air vent must be kept clean so that air can freely flow at all times. If using the power tool at a higher voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and the motor may burn out. If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center. Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed, cracked, or damaged. solvents such as gasoline , thinner benzine , carbon tetrachloride , and alcohol may damage and crack plastic parts. Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry thoroughly. ALWAYS wear eye protection that meets the requirement of the latest revision of ANSI Standard Z87. NEVER leave the random orbit sander on floor and so on while spinning. NEVER apply water or lubricating oil, otherwise hazards from electrical shocks may result. Pushing the random orbit sander too strongly may cause the sanding paper to tear or shorten the life of the sander itself. This random orbit sander is a portable dry plane surface sander that was designed for finishing wood and metal surfaces and ground coats. ALWAYS wear a protective mask when operating the random orbit sander in confined spaces. €Double insulation “ means that two physically separated insulation systems have been used to insulate the electrically conductive materials connected to the power supply from the outer frame handled by the operator. Therefore, either the symbol “ ” or the words “Double insulation” appear on the power tool or on the nameplate. Although this system has no external grounding, you must still follow the normal electrical safety precautions given in this Instruction Manual, including not using the power tool in wet environments. To keep the double insulation system effective, follow these precautions: ⅜ Only HITACHI AUTHORIZED SERVICE CENTER should disassemble or assemble this power tool, and only genuine HITACHI replacement parts should be installed. [. . . ] Contact HITACHI if you are not sure whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. NOTE: Accessories are subject to change without any obligation on the part of the HITACHI. 1 OPTIONAL ACCESSORIES …………… sold separately ⅜ Sanding paper Type Grit No. [. . . ]