User manual HITACHI L32A102G

[. . . ] See page 13 in this User Manual and please visit www. dtvtransition. org LCD COLOR TELEVISION USER MANUAL L32A102 L32A102G READ THE ENCLOSED INSTRUCTIONS CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. Record the serial number of your television for future reference. This serial number is located on the back and right side of the television. If you have a question about this product please call 800-HITACHI for assistance Thank you for purchasing this HITACHI LCD Color Television. The instructions in this manual are described mainly with use of the remote control. [. . . ] 2 Press MENU on the remote control, then press / to highlight Channel. The Channel menu opens. Adding favorite channels To add channels to the favorite channel list: 1 Press MENU on the remote control, then press / to highlight Channel. The Channel menu opens. Channel TV Source Auto Scan Favorites List Channel No. Channel Label DTV Signal Move Select MENU Cable 1-2 Sencore Strong Return Channel TV Source Auto Scan Favorites List Channel No. Channel Label DTV Signal Move Select MENU Cable 1-2 Sencore Strong Return 3 Press to enter the Channel menu. The check mark appears, and the screen shows the channel. 2 Press to enter the Channel menu. 15-1 15-2 Channel Name KPBS-HD V-me Favorite Viewing channel information To view channel information: 1 In digital TV mode, select a channel you want to watch. 2 Press INFO once to display information about the channel. 14-1 Move Select MENU Return CC SD CC OFF 480p TV-14 / IQ-NL TV-14 / NL Strong BART-TV 2005/05/20 10:00AM 10:00AM-02:00PM 3 Press INFO again to display information about the program content (if available). 14-1 4 Press / to select a channel that you want to add to the favorite channel list. A check mark appears next to the channel, and the channel is marked as a favorite. To select your favorite channel: 1 Press FAV CH one or more times on the remote control until the Favorite List appears on the screen. 2 Press / to select the preset for your favorite channel. Note The favorite channel function does not work until you have programmed your favorite channels. CC SD CC OFF 480p TV-14 / IQ-NL TV-14 / NL Strong BART-TV 2005/05/20 10:00AM 10:00AM-02:00PM No Info 4 Press INFO again to close. 14 To remove a channel from the favorite channel list: 1 Press MENU on the remote control, then press / to highlight Channel. The Channel menu opens. Video Picture Mode Contrast Brightness Color Tint Sharpness Color Temperature Aspect Noise Reduction Move 1-2 Sencore Strong Select MENU Return TV Mode Channel TV Source Auto Scan Favorites List Channel No. Channel Label DTV Signal Move Cable Dynamic 60 29 75 0 70 Cool 16:9 Off Select MENU Return 2 Press to enter the Channel menu. 15-1 15-2 Channel Name KPBS-HD V-me Favorite Move Select MENU Return 4 Press / to select the channel you want to remove. The check mark next to the channel disappears, and the channel is removed from favorite channel list. Adjusting video settings To adjust picture settings: 1 Press MENU on the remote control, then press / to highlight the Video icon. 3 Press / to select one of the following / settings, then press to change the setting. You can select: · Picture Mode-Standard, Dynamic, Soft, or Personal. · Contrast · Brightness · Color · Tint · Sharpness · Color Temperature -Normal, Warm, or Cool. · Advanced-When Advanced is highlighted, press to open the advanced menu. · H-Pos (RGB mode only) · V-Pos (RGB mode only) · Clock (RGB mode only) · Phase (RGB mode only) · Auto (RGB mode only)-Press to activate the auto adjust feature for RGB mode. (In RGB mode, only 4:3 and 16:9 are available for Aspect. ) · Noise Reduction-Off, Low, Medium, High or Auto. If the TV is operating in a weak-signal area, sometimes the Noise Reduction function can improve the reception. [. . . ] Any defect, malfunction, or failure caused by or resulting from improper or unauthorized service, maintenance or repair. Damage resulting from abuse, misuse, mishandling, neglect or damage caused by exposure to hostile operating environments such as areas containing dust and/or smoke. Damage caused by power surges, accidents, natural disasters or any other events or circumstances outside Hitachi's control. Any Product used in any manner inconsistent with the acceptable set-up, usage, safety or installation in the Product's Operating Guide. [. . . ]