User manual HITACHI L22H01CB

[. . . ] Instruction Manual 19"/22" HD Ready LCD TV with Built-in Digital Tuner L19H01 UB/UW/CB/CW L22H01 UB/UW/CB/CW GB Safety Warnings SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ------------------------------------------------------------------------------------------------------------------------------DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains plug before making or changing connections. [. . . ] Connect all AV power sources before turning on the power switch of the LCD TV or other connected equipments. Press the STANDBY button to turn on your LCD TV. To watch TV cable box, press the INPUT button to select SCART, AV (Y Pb Pr) , HDMI1, HDMI2, and VGA. 16 Connecting an Audio Receiver For better sound quality, you may want to play the LCD TV audio through your stereo system. Rear View of TV ON/OFF SWITCH AC IN Use coaxial cable to connect the audio receiver's coaxial LINE-IN sockets to LCD TV's SPDIF OUT sockets (Only for DVB-T ). Connect all AV power sources before turning on the power switch of the LCD TV or other connected equipments. Press the STANDBY button to turn on your LCD TV. 17 Specifications Troubleshooting Using The TV Features Using The Features Installing the LCD TV Introducing the LCD TV Preparation Preparation Introducing the LCD TV Installing the LCD TV Using The Features Using The TV Features Troubleshooting Specifications HDMI This TV SET supports HDCP ( High-Bandwidth Digital Content Protection ) Protocol for TV SET ( 480p, 576p, 720p, 1 When you connect to the output of an HD ready player ( DVD Player, Set Top Box or PC ) by the HDMI source. To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p. To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz. How to connect If Source Devices have HDMI Output , connect to the HDMI socket located at the rear of the TV using the HDMI Cable supplied with your external device. ) Cab HDMI Cable (not supplied with the product) 18 Using Conditional Access Module (CAM) A Conditional Access Module (CAM) is an electronic device, usually incorporating a slot for a smart card, which equips a DVB television or set-top box with the appropriate hardware facility to view conditional access content that has been encrypted using a conditional access system. They are normally used with direct broadcast satellite services, although the UK digital terrestrial pay TV supplier Top Up TV also uses CAMs. Note This Conditinal Access Module (CAM) does not come with the TV set. It can only be obtained when you subscribe to service providers like Pay TV or other service providers. IMPORTANT Always switch the TV off before inserting or removing the module. Inserting the CAM 1. When using this type of module, first insert the viewing card into the module. Ensure that the arrow on the viewing card faces the arrow of the module before inserting into 3. Insert the module into the Common Interface (CI) slot on the TV at the rear panel. Press the / key to highlight "Setup" menu and press the OK key. / key to enter into the "Cl information" menu and press the OK key 8. Press / /OK key as indicated on the screen to access the CAM's functions. IMPORTANT If no module is inserted, the Conditional Access Module menu will display "Scrambled Program". If the module is not inserted properly, a warning message will show on the screen to remind the users. If you have inserted a module, please ensure it is fully inserted in the correct manner as mentioned in Step 2 above. The functions that now appear on screen are dependent on the contents of the selected Conditional Access Module in your country. Refer to the instruction supplied with the module or contact the vendor. Common interface Connectors at rear of TV(facing downward) ANTENNA Module (CAM) 19 Specifications Troubleshooting HDMI 1 HDMI 2 Using The TV Features Using The Features the module slot. Installing the LCD TV Introducing the LCD TV The Conditional Access Module (CAM) menu provides access to functions contained on the CAM. The module can be inserted into the Common Interface (CI) slot located at the backside (facing downwards) of the TV. Preparation Preparation Introducing the LCD TV Installing the LCD TV Using The Features Using The TV Features Troubleshooting Specifications Chapter 3 Using The Features BASIC OPERATION Tuning in the TV channels After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 100-240V AC mains socket, turn the POWER SWITCH on (the | position) at the rear panel of the TV, and the red light will show on the front centre panel of the TV. Press the STANDBY button, and the red light will change to blue and the Installation screen will show: MENU Audio Setup Auto installation PN "0000" Country select Start Search OK LHD01 MENU button on the remote to start the "Auto Installation". To power off press the STANDBY button, the blue light will change back to red. Selecting a Source Press the INPUT button to display the function required ( TV/SCART/AV(YPbPr)/HDMI1/HDMI2/VGA ). buttons on the remote control or the buttons on the LCD TV to change the TV channels. You can directly select the TV channel required by pressing 1, 2, or 3 etc on the remote . [. . . ] If you want to connect your TV to a VCR and a Satellite/Cable box then go to stage 3b. Then press the screen. I button on the front side view of your TV to switch on your TV. The screen will be blue Press to select SETUP, then press OK to highlight Auto Installation. Press OK again for you to input the DEFAULT PIN Number "0000". Press OK, and then press to select Country first, then press OK to confirm. TEXT DVD SUBTITLE ZOOM AUDIO 3-pin mains plug is for UK model; 2-pin mains plug is for EU model. Note: It is recommended to complete the VCR channel set up before the TV tuning process. [. . . ]