User manual HITACHI KC1105D

[. . . ] ATTENTION The owner's manual contains important operating and maintenance instructions, for your safety, it is necessary to refer to the manual. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING. This is normal and does not indicate a problem with the unit. 2 Safety Information Some Do's And Don'ts On the Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. [. . . ] Press the Standby/on button to switch on your radio. Scanning for Radio Stations For initial use, press the SCAN button. The DAB radio will now scan for DAB stations in your area and store them in memory. Once the scanning is completed, the DAB stations will be displayed in alphanumeric order. The first station in the list will be selected. Press < or > button to cycle through the available stations. Note: If no DAB signal is found in your area, it may be necessary for you to relocate your radio. Alternatively, visit http://www. ukdigitalradio. com/coverage to check that DAB coverage is available in your area. How to Reset the DAB Radio You can delete all of the preset stations and return the radio to its factory settings as following: 1. Press the SELECT button The presets are being erased and the radio is being returned to its factory condition. Note: If you do not wish to reset the radio, wait a few seconds without pressing any buttons and the radio will revert to its previous operating condition. 9 How to tune in FM Radio Stations To listen to FM radio stations switching the DAB radio on and press the FUNCTION button. 1. Press the < button to scan down through the frequency band. 10 Setting DAB/FM Station Presets Your DAB radio can store 10 FM presets and 10 DAB presets. Press the MENU button, and then press the < or > button until PRESET being displayed. 2. Use < or > buttons to select the preset position and then press and hold the SELECT button for 5 sec. Preset * saved being displayed. To select a stored DAB or FM station, simply press the MENU button, press < or > to browse the preset stations. Press SELECT button to select. Selecting a Preset DAB/FM station 11 To Show the Signal Strength in DAB mode Press the SELECT button, and the LCD screen display will show a signal bar with the strength of the current station. The indicator on the signal bar shows the minimum acceptable signal level. Note: Stations with signal strength below the minimum signal level will not provide a steady stream of audio. Finding and Adding New Stations Press the SCAN button until "Scanning. . . " appears on the display. The radio will scan all the DAB channels and add any new stations available to the station list. Volume Control Adjust the radio volume to the desired level by pressing the Volume + / - button. Headphone Socket: You can listen to your radio with stereo headphones. 12 Menu Options (DAB only) Menu Controls 13 To change station order 1. Press the SELECT button to select your choice. To specify the order in which stations are displayed The top line of the display shows the current selected Station Order (eg. Station, Alphanumeric, Active Station, Prune stations) and it can be changed. Press the < or > button to choose between the station order options. Press the SELECT button to select the current option. Station order Fav station Alphanumeric Active station Prune stations Description List the most frequently selected stations first. List active stations [ones that are currently broadcasting] before inactive ones. Remove inactive stations from the station list. 14 Dynamic Label Segment (DLS): This is scrolling text information supplied by the DAB station. It can also playback MP3 or unprotected WMA files from a CD, SD Card or USB device Note: For your CD-R/RW, USB, and SD/MMC devise, make sure backup your data on this device, and then it will be work normally. 17 Playing a CD This DAB radio can play ordinary audio CDs, CD-R, CD-RW discs. Close the CD cover. During Audio CD playback the screen displays the track number and the elapsed time. In CD STOP mode, if the disc is a normal audio CD, the display shows the total number of tracks and total tracks time on the disc. During MP3/WMA playback the screen displays folder number, file number and elapsed time on the display top line and scrolling file information (ID3/ASF text), where available. [. . . ] SNOOZE icon will be showing on the top left corner of the screen after pressing it. 3. Press Alarm or Standby to exit snooze mode and to turn alarm off 27 Setting the Backlight 1. Then press the > button to select Set backlight, and press the SELECT button. 2. Press < or > button to set brightness of the LCD display between 1 and 10. [. . . ]