User manual HITACHI HIT19WDVB

[. . . ] Instruction Manual 15. 4"/19" Widescreen LCD TV With Intergrated Digital Tuner HIT15WDVB HIT19WDVB GB Safety Warnings SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT ------------------------------------------------------------------------------------------------------------------------------DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. [. . . ] This TV SET supports HDCP ( High-Bandwidth Digital Content Protection ) Protocol for TV SET ( 480p, 576p, 720p, 1080i ) modes. When you connect to the output of an HD ready player ( DVD Player, Set Top Box or PC ) switch to the AV6 ( HDMI ) function and the TV will automatically detect the resolution used by the HDMI source. To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p. To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz. Preparation Preparation Introducing the LCD TV Installing the LCD TV Using The Features Using The DTV Features Troubleshooting Specifications 20 Chapter 3 Using The Features BASIC OPERATION Tuning in the TV channels After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 100-240 V AC mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the front centre panel of the TV. Press the STANDBY button, the red light will change to green and the First Time Installation screen will show: 1. Make sure an aerial is fitted then press OK button on the remote to start the Auto Programme Scan ( APS ). OK: Start Searching 2. In a short while you will see the TV programmes briefly as each channel is received and stored in the memory. To view analogue TV, press INPUT button and use the arrow buttons to select TV, then press the OK button. To power off press the STANDBY button, the green light will change to red. Selecting a Source Press the INPUT button to display the function required ( TV/AV ). Using the arrow buttons on the remote highlight the function required and press the OK button to select the function. You can directly select the TV channel required by pressing 1, 2, or 3 etc on the remote button pad. To turn mute off, press the MUTE button again, or simply press the VOL. Sleep Timer Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the OFF, 15, 30, 60 minutes; when the LCD TV has reached the set time, it will automatically turn off. If the TV has no input signal, it will automatically power down to standby after 15 minutes. OSD Menu Operation Video Adjust picture setting such as Picture Mode, Contrast, Brightness, Colour, Tint(NTSC), Sharpness, and Advanced. Adjust Colour Standard, Sound Standard, APS, Manual Search, and Channel Setup. Adjust preferences such as OSD, Blue Screen, Childlock, Sleep Timer, OSD Timer, and OSD Reset. Adjust screen such as Horizontal Size, Horizontal Position, Vertical Position, Phase, and Auto Sync. The DTV menu provide four sub-menus as following: Edit Favourite List, Configuration, Parental Control, EPG ( Electronic Programme Guide ), with which you can set the DTV as you wish. Audio Setup Preferences DTV ( Digital TV ) 2 Press the MENU button on the remote control. 3 Use Use buttons to highlight your main menu option, then press OK button to enter your selected option. Use buttons to change the value of the VIDEO Use this Video setting menu to adjust the picture quality which best corresponds to your viewing requirements. The Video Menu includes the following options: OPTION Picture Mode DESCRIPTION Standard: Select for standard picture settings. [. . . ] This can help you to easily find the satellite/cable channel since the TV will play that selected channel. Press to select country as you wish, press OK to exit the current menu. Press to select the Start APS, then press OK to start the channel tuning. Your TV will now automatically start to tune in all available channels, including your VCR and Satellite / Cable channel if you connected a VCR or Satellite / Cable box. Note: Press OK to exit when the tuning process is finished. RCT-1522 6 A B C D E Sorting a channel 7 A Skipping a channel Checklist. . . You should have. . . Put the two AAA size batteries in your remote control. Switched on your TV and any other connected equipment. Press the MENU button on the remote control to enter the menu option. [. . . ]