User manual HITACHI HIFAX 31

[. . . ] CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling. NOTE · The information in this manual is subject to change without notice. · The manufacturer assumes no responsibility for any errors that may appear in this manual. · The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. [. . . ] To revert back to the previous resolution without saving changes, move the cursor to the CANCEL on screen and press the cursor (or the ENTER) button. The screen will then return to the RESOLUTION menu displaying the previous resolution. · For some pictures, this function may not work well. 33 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor (or the ENTER) buttonn to execute the item. Then perform it according to the following table. Item Description D-ZOOM Using the / cursor buttons adjusts the magnification ratio. Small Large · The on-screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom. Down Up · The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 512 (full screen). Left Right · The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 512 (full screen). TOP MID BOTTOM The PICTURE POSITION is not changed if any of the following cases apply. · The input signal has an aspect ratio of 4:3 or vertically larger than 4:3, while the ASPECT is set to NORMAL. The audio coming into the port selected in the (2) is output while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using the / cursor buttons. COMPUTER IN1 COMPUTER IN2 S-VIDEO AUDIO OUT STANDBY VIDEO AUDIO SOURCE · Choose the AUDIO OUT STANDBY, to select the audio output to the AUDIO OUT ports in the standby state. · While the RETURN is selected, pressing the cursor (or the ENTER) button returns to the previous menu. (Closed Caption) is automatically activated when is selected and an input signal containing C. C. This function is available only when the signal is NTSC for the VIDEO or the S-VIDEO, or 480i@60 for the COMPUTER IN1 or the COMPUTER IN2, and when the AUTO is selected for the DISPLAY in the C. C. menu under the SCREEN menu ( 41). 36 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor (or the ENTER) button to execute the item. Then perform it according to the following table. Item Description Using the /// cursor buttons switches the OSD (On Screen Display) language. ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL. . . (shown in the LANGUAGE dialog) LANGUAGE Press the ENTER (or the INPUT) button to save the language setting. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. The blank screen is a screen for the temporarily blanking feature ( 21). [. . . ] ­ The input changeover settings are mismatched. Select the input signal, and correct the settings. 15, 16 The BLANK function for pictures and the MUTE function for sounds are working. AV MUTE may be active. Refer to the item "Sound does not come out" and "No pictures are displayed" on the next page to turn off the MUTE and BLANK functions. 15, 21, 44 (Continued on next page) 61 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page 9 The signal cables are not correctly connected. Correctly connect the audio cables. The MUTE function is working. Sound does not come out. Restore the sound pressing MUTE or VOLUME +/- button on the remote control. [. . . ]