User manual HITACHI HDC-1205E

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The images can be displayed in forward or reverse sequence with the / buttons. To return to normal magnification, turn the zoom lever to side. An [ ] icon is displayed with the video data. Video clips cannot be rotated. Playback Display This function allows you to search quickly for the image that you want and playback images on the LCD monitor sequentially. If the 1st image taken is displayed, press the button to playback the 11th image taken. Press and hold the previous or next images automatically in sequential order. Release the / buttons if you wish to stop the automatic playback. If the total number of images is less than 10, press the press the button jumps to the last image. Video clips will be displayed with an [ ] icon. button jumps to the first image and EN-20 Removing Red-eye You can use this function to remove the red-eye effect after an image is taken. To save your corrected image, select [Confirm] with the / buttons, and press the SET button. When this process ends, this replaces the original image with the corrected image. Dynamic Lighting Feature This feature compensates for the unfavorable lighting conditions by brightening underexposed areas and balancing overexposed areas. To save your corrected image, select [Confirm] with the / buttons, and press the SET button. When this process ends, this replaces the original image with the corrected image. EN-21 Protecting Images Set the data to read-only to prevent images from being erased by mistake. Select the image that you want to protect with the / Date/Time 2010. 01. 01 buttons. Select [Protect] with the / buttons, and press the Auto Off SET button. Protection is applied to the image and the camera returns to the playback mode. When [All] has been selected, [ ] is displayed with all the images. Canceling the Protection To cancel protection for only one image, display the image on which you want to remove the image MENU SET protection. Select the image that you want to cancel protection with the / buttons. Select [Single] or [All] with the / buttons, and press the SET button. The removal of image protection is executed and the camera returns to the playback mode. Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of their protected status. EN-22 DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. Select [Single] or [All] with the / buttons, and press the SET button. Set the number of prints with the / buttons, and press the SET button. [. . . ] Turn the zoom lever to side to zoom out on the subject, and provides a wider angle image. Pressing the shutter button down halfway automatically focuses and adjusts the exposure, and pressing the shutter button down fully captures the image. The focus area frame turns green when the camera is in focus and the exposure is calculated. When the focus is not suitable, the frame of the focus area turns red. QSG-3 VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 / 720p pixels. [. . . ]