User manual HITACHI DZ-MV5000E(UK)

[. . . ] DZ-MV5000E (UK) Instruction manual To obtain the best performance and ensure years of trouble-free use, please read this entire instruction manual. FOR TECHNICAL HELP & SERVICE PLEASE CALL 0870 405 4405 This manual was printed with soy based ink. Printed on recycled paper Basic Instruction Manual Important Information For Your Safety The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the camera/recorder is to be left unattended for a long period of time, turn it off. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE RECOMMENDED ACCESSORIES ONLY. [. . . ] Even after the on-screen information is removed from the TV screen, it will still appear in the viewfinder or on the LCD screen. "Off" setting "On" setting 0:00:00 REM 3 0 MIN FINE 10/ 8:00 6/2007 TV screen TV screen 76 Disc Navigation Using Disc Navigation STARTING OR TERMINATING DISC NAVIGATION Disc Navigation is a tool for editing scenes recorded on this DVD video camera/recorder. Here is an explanation on "scene" and "programme", so that you will be able to make most use of Disc Navigation function. The screens in this instruction manual are basically those that will appear when DVD-RAM disc is used: Some items will not appear when DVD-RW/DVD-R/+RW disc or card is used, but the operation is the same. When using disc: Set the power switch to " " or " ". When using card: Set the power switch to " ". Before You Begin 1 Press the DISC NAVIGATION button. The Disc Navigation screen (shown on page 78) will appear. 2 Press the DISC NAVIGATION button again. Disc Navigation will be terminated and the DVD video camera/recorder will enter the recording pause status. You can also press the button to end Disc Navigation. 77 Disc Navigation screen Thumbnail Selected scene*1 number/ Number of all scenes Current page position*4 Still image icon*2 Operation guide*3 PLAY A l l P r og r ams 0 01 / 014 Cursor Bar graph Disc type icon*5 *1 Scene: Video (movie) . . . . . . . . . . "One scene" refers to images recorded from one press of REC button until recording is stopped by pressing the REC button again. "One scene" refers to a single photo recording by pressing the PHOTO button. *3 The operation guide will vary depending on the operation status of DVD video camera/recorder. *5 " " will appear for card. Icons to be displayed on thumbnail: . . . . . . . . . . . . . . . . . 96) Note: Pressing the DISPLAY button will display the recording date/time of the scene on which the cursor is placed in the space for operating guide. If no disc or card is inserted, the Disc navigation screen cannot be displayed even by pressing the DISC NAVIGATION button. Each time Disc Navigation is started with a DVD-RW (VF-mode)/DVD-R disc inserted, message "Creating Thumbnail . . . " will appear. If the following disc or card is inserted, the Disc Navigation screen will appear or some message will be displayed: - Write-protected disc - Finalised DVD-RW (VF-mode)/DVD-R/+RW disc - DVD-RW (VF-mode)/DVD-R recorded on a Hitachi DVD video camera/recorder model other than DZMV5000E - Locked card Do not leave the disc navigation screen displayed on TV to which the DVD video camera/recorder is connected: Doing so could damage the TV screen, possibly by burning. 78 PLAYING BACK FROM DISC NAVIGATION SCREEN 1 Press the DISC NAVIGATION button. The selected scene will be framed: This is called a "cursor". 3 Press the button. Playback will start from the selected scene. Note: Pressing the or button will move the cursor to the preceding or following scene. Pressing the or button will move to preceding or following page. ADJUSTING VOLUME DURING PLAYBACK If the LCD monitor is open during playback of movie, playback sound will be heard from the speaker. Tilt it to the "T" side to increase the volume, "W" side to reduce the volume. VOLUME Volume When playback ends The DVD video camera/ recorder will enter the playback pause status at the last image of last scene. Pressing the or DISC Playback pause NAVIGATION button will restore the Disc Navigation screen. When the playback pause status continues for as long as 5 minutes, the Disc Navigation screen will automatically be restored. Note: Press the button to temporarily stop playback. If you press the button after playback of the last scene on disc finishes, playback will start again from the beginning of disc. In the case of a photo with a large number of pixels, it will take some time for the photo to appear. Playing back photos A photo on DVD-RAM disc will be displayed for approx. [. . . ] DON'T remove any fixed cover as this may expose dangerous voltages. DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. [. . . ]