User manual HITACHI DVPF3E
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HITACHI DVPF3E. We hope that this HITACHI DVPF3E user guide will be useful to you.
You may also download the following manuals related to this product:
HITACHI DVPF3E (1170 ko)
HITACHI DVPF3E (868 ko)
HITACHI DVPF3E (1145 ko)
HITACHI DVPF3E (1158 ko)
HITACHI DVPF3E (830 ko)
HITACHI DVPF3E (1121 ko)
HITACHI DVPF3E (1085 ko)
HITACHI DVPF3E (1161 ko)
HITACHI DVPF3E (1625 ko)
Manual abstract: user guide HITACHI DVPF3E
Detailed instructions for use are in the User's Guide.
[. . . ] DVD/VCR Combo (DVD PLAYER with VIDEO CASSETTE RECORDER)
INSTRUCTION MANUAL
R
Recordable
ReWritable
PAL
SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.
MODEL
DVPF3E
PROGRAM
DVD OUTPUT VCR
TIMER
REC
AV 3
Instruction manual To obtain the best performance and ensure years of troublefree use, please read this instruction manual completely.
Italiano
VIDEO IN
L (mono) AUDIO IN R
Español
Français
English
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
LASER SAFETY
This unit employs a laser. [. . . ] ¡The index mark is not recorded if the PAUSE/STEP (k) is pressed and released during recording recording. ¡The time gap between index marks on the tape should be greater than 1 minute for SP recording and 2 minutes for LP recording. ¡Use the remote control for this procedure .
1 Press INDEX SEARCH so that the Index
Search menu appears.
2 Enter the number of
recordings you wish to skip by pressing Arrow (o/p) within 30 seconds.
INDEX 03
3 Press Arrow (s / B) to start index search.
The DVD/VCR begins rewinding or fast forwarding to the beginning of desired progamme. When the preset programme is reached, the DVD/VCR will start playback automatically. ¡After index search, the VCR will play the tape auto-
22
EN
2C15
RECORDING FUNCTION
VCR
It may be UNLAWFUL to record copyrighted material without the consent of the copyright owner. ¡You can prevent accidental erasing of a recording by breaking off the erase prevention tab Tab on the back edge of the cassette. ¡If you decide to record on the tape again, cover the hole with plastic tape.
OTR (One Touch Recording)
VCR
This feature allows you to set the recording length simply by pressing REC on the VCR.
¡REC on the remote control is not available for this procedure.
1 Press REC to begin OTR. Change the recording length by pressing REC repeatedly.
0:30 1:00. . . . 7:30 8:00
TWO DIFFERENT TAPE SPEEDS
Before recording, select the tape speed : SP mode (Standard Play) or LP mode (Long Play). The table below shows the maximum recording/playback time using E-60, E-120, E-180 or E-240 tapes in each mode.
TYPE
OF TAPE
Normal recording
¡To check time remaining during an OTR, press
DISPLAY.
¡To change the recording length during an OTR,
press REC until the desired length appears.
¡To stop an OTR before recording is finished, press STOP ( C ). ¡To cancel the OTR but continue recording, press
TAPE SPEED E-60 E-120 E-180 E-240
RECORDING/PLAYBACK TIME SP MODE LP MODE 1 HOUR 2 HOURS 2 HOURS 4 HOURS 3 HOURS 6 HOURS 4 HOURS 8 HOURS
NORMAL RECORDING
VCR 1 Insert a cassette tape with its erase prevention tab in place.
REC repeatedly until "I" appears in the upper left corner of the TV screen. ¡If a tape ends during OTR, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks. To use the VCR again, press TIMER on the remote, or STOP/EJECT on the DVD/VCR.
(If necessary, rewind or fast forward the tape to the point at which you want to begin recording. )
TIMER RECORDING
VCR
You may programme the DVD/VCR to start and end a recording while you are away. You can set eight programmes to record on specific days, daily or weekly within a 1 year period. · Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. )
2 Press Number or PROG (o/p) to select the
channel to be recorded.
3 Press SPEED to select the tape speed
(SP/LP).
4 Press REC to begin recording. ¡To temporarily stop recording or to resume it, press
PAUSE/STEP. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.
1 Press MENU. 5 Press STOP ( C) when recording is completed.
Note
¡When you wish to watch another programme while
2 Press Arrow (o/p) to
select "TIMER", then press Arrow (B).
MENU TIMER SET UP INITIAL
recording, select desired channel on your TV.
23
EN
2C15
English
Notes If you have not set the clock yet, "CLOCK" setting menu appears. If so, follow the steps outlined in the "Setting the Clock" section. ¡When you press Arrow (B) after pressing Arrow (o/p) or during steps 3 to 10, the input mode will move to the next step. ¡If you do not press Arrow (B) within 5 seconds of setting an item, the input mode will move to the next step. [. . . ] · Clean video heads only when problems occur.
DISC HANDLING
¡Use discs which have the following logos on them. ¡Never wipe with a circular motion.
Recordable
(Optical audio digital discs. )
ReWritable
¡Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
¡Do not use detergent or abrasive cleaning agents.
¡Always store the disc in its protective case when it is
not used.
Make your contribution to the environment!!!· You can dispose of them at a collection point for used up batteries or special waste. 40
EN
2C15
SPECIFICATIONS
Product type: Discs: DVD/VCR Combo (DVD player with Video Cassette Recorder) DVD video Audio CD Video Cassette tape UHF Channel 22 ~ 69 220 - 240 V ~ +/- 10%, 50 Hz +/- 0. 5% 30 W (standby: 9. 0 W) 41°F(5°C) to 104°(F40°C) W 17-1/8" (435 mm) H 3-7/8" (99 mm) D 8-9/16" (218 mm) Weight: 8. 4 lbs (3. 8 kg)
Converter output: Power source: Power consumption: Operating temperature: Dimensions:
¡Designs and specifications are subject to change without notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI DVPF3E
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI DVPF3E will begin.