User manual HITACHI DS14DVF3

[. . . ] IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!Please read and understand this manual BEFORE operating the power tool. Please keep this manual available for other users and owners before they use the power tool. Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power tool. [. . . ] To reduce risk of electric shock, unplug charger from receptacle before attempting any maintenance or cleaning. You must charge the battery before you can use the cordless driver drill. Before using the model UC18YG battery charger, be sure to read all instructions and cautionary statements on it, the battery and in this manual. Follow these instructions to avoid the risk of injury: Improper use of the battery or battery charger can lead to serious injury. Keep the battery away from direct sunlight and use only where there is low humidity and good ventilation. Charge when the temperature is below 50°F (10°C) or above 104°F (40°C). Insert foreign objects into the hole for the battery or the battery charger. Store the battery or battery charger in places where the temperature may reach or exceed 104°F (40°C). Using the charger on any other voltage may overheat and damage the charger. Wait at least 15 minutes between charges to avoid overheating the charger. Disconnect the power cord from its receptacle when the charger is not in use. At the end of it's useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety instructions contained in this manual. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool. Once the charging has been completed, wait 15 minutes rest until the next charging. If the battery is recharged when it is warm due to battery use or exposure to sunlight, the pilot lamp may not light. As the internal chemical substance of new batteries and batteries that have not been used for an extended period is not activated, the electric discharge might be low when using them the first and second time. When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter. If such a battery is recharged immediately after use, its internal chemical substance will deteriorate, and the battery life will be shortened. [. . . ] Table 3 Work Wood Drilling Steel Aluminum Screw tightening Machine screw Wood screw 1 ­ 22 1­ Use the bit and socket matching the screw diameter. (459 kg-cm) (DS18DVF3) Screw tightening for hard wood material Operation example Machine screw tightening Screw tightening for soft wood material Thick screw tightening When used as a drill. NOTE: The selected content shown in Table 4 indicates the differences according to screw type, screw size and material used. While operating the Cordless driver drill, take care not to lock the motor. [. . . ]