User manual HITACHI CPX960

[. . . ] · The manufacturer assumes no responsibility for any errors that may appear in this manual · The reproduction, transmission or use of this document or contents is not permitted without express written authority. TRADEMARK ACKNOWLEDGMENT : PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. VESA and SVGA are trademarks of the Video Electronics Standard Association. Carefully observe the trademarks and registered trademarks of all companies, even when not mentioned. CONTENTS Page Page FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 BEFORE USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents of Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Names. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . 20 OSD Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Indicators Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Symptom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation of the Projector and Screen. . . . . . . . 6 Angle Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Example of System Setup . . . . . . . . . . . . . . . . . . . . . . 8 Plug & Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . 23 WARRANTY AND AFTER-SERVICE . . . . . . 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TABLES Table 1. [. . . ] Select an item with the and buttons, and start operation. SETUP INPUT IMAGE OPT. Image Menu Item Description Reduce size of top of image · When this function is activated, the image may not be displayed correctly with some input signals. Keystone Adjustment: KEYSTONE Reduce size of bottom of image Select Blank Screen Color: Select color with the BLANK MIRROR and buttons. · The image is cleared when the BLANK mode is set with BLANK ON, or when there is no signal, and the entire screen is displayed in the selected color. Operation Start/Stop: Press the or button. Select Mirror Status: Select mirror status with and Operation Start/Stop: Press the or button. Setup Initial Screen Display: Select TURN ON with the Clear Initial Screen Display: Select TURN OFF with the buttons. button. START UP · Note that if TURN OFF is selected the blank screen is displayed in blue when there is no signal. P. Display : Press the or ( · Valid only at RGB IN 1, RGB IN 2 or DIGITAL input. ) button. ENGLISH-14 OPERATIONS (continued) SETUP INPUT IMAGE OPT. The function indicated (**) are effective on video input mode only, not on RGB input mode, except in the P. IN P. window on RGB input mode. VOLUME MENU COLOR LANGUAGE AUTO OFF SYNC ON G HDTV Table 7. Options Menu Item VOLUME MENU COLOR LANGUAGE Description Volume Adjustment: Reduce VOLUME Increase VOLUME Select Menu Background Color: Select with the Operation Start/Stop: Press the or button. Select Menu Display Language: Select with the and buttons. and buttons. AUTO OFF Operation Start/Stop: Press the or button. · Do not use the projector with the lamp cover removed. Lamp Reflector Front glasss Lamp Life Projector lamps have a finite life. The image will become darker, and hues will become weaker, after a lamp has been used for a long period of time. Replace the lamp if the LAMP indicator is red, or the CHANGE THE LAMP message appears when the projector is switched ON. (See Table 9 of P. 20 and Table 10 of P. 21. ) NOTE · The LAMP indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again. If the LAMP indicator is still red, replace the lamp. ENGLISH-17 ENGLISH Lamp MAINTENANCE (continued) Replacing the Lamp 1. Switch the projector OFF, remove the power cord from the power outlet, and wait at least 45 minutes for the unit to cool. Check that the projector has cooled sufficiently, and gently turn it upside down. Loosen the two screws, and gently remove the lamp while holding the grips. Also steadily push the opposite side of the screwed lamp into the unit. · Do not use the projector with the lamp cover removed. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. [. . . ] (3) The projector returns the response code `06H' to the computer. Using the projector default settings (Reset Command) (1) The computer sends the default setting code Header + Command data (`06H'+`00H'+ type (2 bytes) +`00H'+`00H') to the projector. (3) The projector returns the response code `06H' to the computer. Increasing the projector setting value (Increment command) (1) The computer sends the increment code Header + Command data (`04H'+`00H'+ type (2 bytes) +`00H'+`00H') to the projector. (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer. Decreasing the projector setting value (Decrement command) (1) The computer sends the decrement code Header + Command data (`05H'+`00H'+ type (2 bytes) +`00H' + `00H') to the projector. [. . . ]