User manual HITACHI CP-X3011N

[. . . ] Projector CP-X2011N/CP-X2511N /CP-X3011N/CP-X4011N User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] (continued on next page) 48 SCREEN menu Item Description The C. C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C. C. DISPLAY Select Closed Caption DISPLAY setting from following options using / buttons. AUTO ON OFF AUTO : Closed Caption automatically displays when the volume is muted. · The Closed Caption is the function to display the dialogue, narration, and / or sound effects of a television program or other video sources. The Closed Caption availability is depending upon broadcaster and/or content. MODE Select Closed Caption MODE setting from following options using / buttons. TEXT : Display Text data, which is for additional information such as news reports or a TV program guide. CHANNEL Select Closed Caption CHANNEL from following options using / buttons. 1 2 3 4 1: Channel 1, primary channel / language 2: Channel 2 3: Channel 3 4: Channel 4 The channel data may vary, depending on the content. (Closed Caption) 49 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item Description Using the / buttons turns on/off the automatic signal search function. ON OFF When the ON is selected, detecting no signal automatically cycles through input ports in the following order. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 LAN USB TYPE A VIDEO S-VIDEO COMPONENT HDMI USB TYPE B (Y, Cb/Pb, Cr/Pr) · It may take several seconds to project the images from the USB TYPE B port. ON OFF ON : Automatic keystone distortion correction will be executed whenever changing the slant of the projector. Please execute the AUTO KEYSTONE (EXECUTE) in the SETUP menu for automatic keystone distortion correction. · When the projector is suspended from the ceiling this feature will not function properly so select the OFF. · This function will be unavailable when the Transition Detector is on ( 70). ON OFF When set to the ON, the lamp in projector will be automatically turned on without the usual procedure ( 17), only when the projector is supplied with the power after the power was cut while the lamp was on. [. . . ] Use the REMOVE USB function first, remove the USB storage device, and then insert it into the port again. Before removing the USB storage device, be sure to use the REMOVE USB function on the thumbnail screen, which appears when the USB TYPE A port is selected as the input source. (continued on next page) Reference page 9 ~ 13 18 18, 42, 43 42 43 17 9 ~ 13 30 9 25 51 12 96 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Video screen display freezes. Perform picture adjustments by changing the COLOR TEMP, COLOR, TINT and/or COLOR SPACE settings, using the menu functions. [. . . ]