User manual HITACHI CP-X256

[. . . ] Projector CP-X256/CP-X265 User's Manual ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] Then perform it referring to the following table. Item Description Using the buttons / switches the OSD (On Screen Display) language. ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO NORSK ó NEDERLANDS ó PORTUGUÊS ó ó ó ó SVENSKA ó LANGUAGE SUOMI ó POLSKI ó TÜRKÇE MENU POSITION Using the buttons /// adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 0 seconds. The blank screen is a screen for the temporarily blanking feature (22). MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK BLANK MyScreen is a screen you can register as a desired screen. BLUE, WHITE and BLACK are non-patterned (plain) screens in each color. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. · For the MyScreen, please refer to the MyScreen item (38). 37 SCREEN Menu SCREEN Menu (continued) Item Description Using the buttons / switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen. · This function will be unavailable and fixed to Myscreen when MyScreen Password in the Security Menu is on. This item functions for capturing the MyScreen of the blank screen and the start-up screen. Please execute displaying the input including the picture you want to capture. It will ask you if you start capturing the picture from the current screen. Please wait for the target picture to be displayed, and press the ENTER button on the remote control when the picture is displayed. To stop performing, press the RESET or ESC button on the remote control. Please move the frame to the position of the picture which you want to use. To restore the screen and return to the previous dialog, press the RESET or ESC button on the remote control. When the registration is completed, the registered screen and the message "MyScreen registration is finished. " are displayed for several seconds. If the registration failed, the message "A capturing error has occurred. · This function will be unavailable when MyScreen Password in the Security Menu is on. [. . . ] Then, if the problem is not removed after the remedy, please contact your dealer or service company. S-V IDE O RG B IN 2 LAN CO NTR OL VID EO RG BO UT AU DIO OU T US B . 3. Phenomenon Cases not involving a machine defect Reference page 4 7 The electrical power cord is not plugged in. Correctly connect the power cord. The power switch is not set to the on position. Set the power switch to [ | ] (On). Power does not come on. The main power source has been interrupted during operation such as by a power outage (blackout), etc. Please turn the power off, and allow the projector to cool down at least minutes, then turn the power on again. 7 Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Please turn the power off, and allow the projector to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. 53, 54 The signal cables are not correctly connected. Correctly connect the connection cables. [. . . ]