User manual HITACHI CPX1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HITACHI CPX1. We hope that this HITACHI CPX1 user guide will be useful to you.


HITACHI CPX1 : Download the complete user guide (5977 Ko)

You may also download the following manuals related to this product:

   HITACHI CPX1 TECHNICAL GUIDE (679 ko)
   HITACHI CPX1 TECHNICAL MANUAL (679 ko)

Manual abstract: user guide HITACHI CPX1

Detailed instructions for use are in the User's Guide.

[. . . ] Projector CPX1/CPX5 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] · When the projector is inclined to near ±30 degree or over, this function may not work well. · This function will be unavailable when the Transition Detector is on (46). Shrink the top of the image ó Shrink the bottom of the image · The adjustable range of this function will vary with the type of input signal. · This function will be unavailable when the Transition Detector is on (46). AUTO KEYSTONE EXECUTE KEYSTONE (continued on next page) 3 SETUP Menu SETUP Menu (continued) Item WHISPER Description Using the / buttons turns off/on the whisper mode. NORMAL ó WHISPER · When the WHISPER is selected, acoustic noise and screen brightness are reduced. Using the / buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (46) will be displayed when projector is restarted after the power switch is turned off. VOLUME Using the / buttons adjusts the volume. (2) Use the / buttons to select an Audio port for the USB STORAGE port. AUDIO IN ó ó USB STORAGE · This setting is effective only when a signal from the USB STORAGE port is selected. AUDIO 3 SCREEN Menu SCREEN Menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description Using the / buttons switches the OSD (On Screen Display) language. ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO NORSK ó NEDERLANDS ó PORTUGUÊS ó ó ó ó SVENSKA ó LANGUAGE SUOMI ó POLSKI ó TÜRKÇE MENU POSITION Using the /// buttons adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. The blank screen is a screen for the temporarily blanking feature (19). MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK BLANK MyScreen ORIGINAL BLUE, WHITE, BLACK Feature Screen can be registered by the MyScreen item (35). Screen preset as the standard screen. Plain screens in each color. · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes. (continued on next page) 33 SCREEN Menu SCREEN Menu (continued) Item Description Using the / buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature Screen can be registered by the MyScreen item MyScreen START UP (35). ORIGINAL TURN OFF Screen preset as the standard screen. Plain black screen. · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (33) after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, the plain black screen is instead used. · When the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu (43), the START UP is fixed to MyScreen. (continued on next page) 34 SCREEN Menu SCREEN Menu (continued) Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER button when the image is displayed. [. . . ] After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. If the same indication is displayed after the remedy, please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH. It is time to clean the air filter. Lighting In Green Simultaneous blinking in Red Please immediately turn the power off, and clean or change the air filter referring to the section "Air Filter". After cleaning or changing the air filter, please be sure to reset the filter timer. After the remedy, reset the power to ON. Lighting In Green Alternative blinking in Red There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (5°C to 35°C). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CPX1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CPX1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.