User manual HITACHI CPS335

[. . . ] Projector CP-S335/X340/X345 User's Manual ­ Operating Guide ENGLISH Technical Section Quick Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that , if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] MyScreen ORIGINAL BLUE WHITE BLACK OSD BRIGHT BLANK MyScreen is the screen you can register a desired screen. BLUE, WHITE and BLACK are non-patterned (plain) screens in each color. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. · For the MyScreen, please refer to the item MyScreen (34). 33 ENGLISH ENGLISH Multifunctional settings SCREEN Menu (continued) Item Description Using the buttons / switches the mode the start up screen. The start up screen is the screen displayed when no signal or an unsuitable signal is detected. MyScreen ORIGINAL TURN OFF MyScreen is the screen you can register a desired screen. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen. About the BLUE, BLACK and BLANK screens, please refer to the item BLANK (33). This item functions for capturing the MyScreen of the blank screen and the start up screen. Please execute displaying the input including the picture you want to capture. It will ask you if you start capturing the picture from the current screen. Please wait for the target picture to be displayed, and press the ENTER button on the remote control when the picture is display. To stop performing, press the RESET or ESC button on the remote control. Please move the frame to the position of the picture which you want to use. To restore the screen and return to the previous dialog, press the RESET or ESC button on the remote control. When the registration is completed, the registered screen and the message "MyScreen registration is finished. " are displayed for several seconds. If the registration failed, the message "A capturing error has occurred. TURN ON TURN OFF When the TURN ON is selected, the item MyScreen cannot be performed. Use this function for protecting the current MyScreen. START UP My Screen My Screen Lock 34 Multifunctional settings SCREEN Menu (continued) Item Description Using the buttons / turns on/off the message function. TURN ON TURN OFF When the TURN ON is selected, the following message function works. "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "Searching . . . . " while searching for an input signal "Detecting. . . . " when an input signal is detected The indication of the input signal by changing The indication of the aspect ration by changing . ENGLISH MESSAGE 35 Multifunctional settings OPTION Menu With the OPTION menu, items shown in the table below can be performed. [. . . ] If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. 1. 2. Lamp cover In the case of replacement by yourself, After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing up. Please unhook the claws of the lamp cover using a minus screwdriver or similar, and remove the lamp cover. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles. [. . . ]