User manual HITACHI CP-X10000W

[. . . ] Projector CP-X10000/CP-WX11000/CP-SX12000 User's Manual (detailed) ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This entry warns of a risk of serious personal injury or even death. [. . . ] Protocol) · Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is "ON". (continued on next page) SETUP 56 NETWORK menu Item Description Use the / / / buttons to enter the IP ADDRESS. · The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network. · The SUBNET MASK "0. 0. 0. 0" is prohibited. SUBNET MASK SETUP (continued) Use the / / / buttons to enter the DEFAULT GATEWAY DEFAULT (a node on a computer network that serves as an GATEWAY access point to another network) address. The DNS server is a system to control domain names and IP addresses on the Network. DNS SERVER Use the / buttons to enter the TIME DIFFERENCE. Use the button to return to the menu after setting the TIME DIFFERENCE. Use the / / / buttons to enter the Year (last two digits), Month, Date, Hour and Minute. · The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings of the User's Manual - Network Guide) 57 DATE AND TIME (continued on next page) NETWORK menu Item Description (1) Use the / buttons on the NETWORK menu to select the PROJECTOR NAME menu and press the button. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. Use the / / / buttons and the ENTER or VIDEO button to select and enter characters. The RESET or COMPUTER button can be used to erase 1 character at a time. Also if you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER or VIDEO button, 1 character or all characters will be erased. The PROJECTOR NAME can be input up to 64 characters. (3) To change an already inserted character, press the / button to move the cursor to one of the first 3 lines, and use the / buttons to move the cursor on the character to be changed. (4) To finish entering text, move the cursor to the OK on screen and press the , ENTER or VIDEO button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press the , ENTER or VIDEO button. PROJECTOR NAME (continued on next page) 58 NETWORK menu Item Description Selecting this item displays the MY IMAGE menu. The application software "PJImage" is required to store image(s) into the projector. Use the / buttons to select an item which is a still image by the MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the User's Manual - Network Guide) and the or ENTER button to display the image. · The image names are each displayed in 16 characters or less. MY IMAGE To switch the image displayed Use the / buttons. To erase the image displayed and its source file in the projector. (1) Press the RESET button on the remote control while displaying an image to display the MY IMAGE DELETE menu. (continued on next page) 59 NETWORK menu Item Description Selecting this item displays the NETWORK -INFORMATION- dialog for confirming the network settings. INFORMATION · Only the first 16 characters of the projector neme are displayed. [. . . ] Header + Command data (`02H' + `00H' + `00H' + `00H' + connection ID (2 bytes)) (2) The projector returns the response code to the PC. `9EH' + `04H' + connection ID (2 bytes) + number of projectors (2 bytes) + group (1 byte) + ID (1 byte) When the projector cannot understand the received command, the error code is sent back to the PC. `96H' + `04H' + connection ID (2 bytes) + `00H' + `00H' + `00H' + `00H' When the projector cannot execute the received command, the error code is sent back to the PC. `9FH' + `06H' + connection ID (2 bytes) + position number of projector having an error* (2 bytes) + group (1 byte) + ID (1 byte) + error code (2 bytes) *The position number is counted from the projector connected to PC directly, which has No. 1 as position number. [. . . ]