User manual HITACHI CP-RX60Z

[. . . ] Projector User's Manual ­ Operating Guide CP-RX60 Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] Make sure that the application window is set to its maximum size prior to attempting to use this feature. At a video signal or s-video signal The signal type mode best suited for the respective input signal and the aspect ratio (ASPECT) will be selected automatically. And the vertical position (V POSITION), the horizontal position (H POSITION) will be automatically adjusted. At a component video signal The vertical position (V POSITION), the horizontal position (H POSITION) and the clock phase (H POSITION) will be automatically adjusted. · This function is available only when the AUTO mode is selected to the item VIDEO FORMAT of INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. · The automatic adjustment operation requires approximately 10 seconds. a irregular picture, a color lack), please select the suitable mode to the item "VIDEO" of the INPUT menu. H SIZE AUTO ADJUST EXECUTE 31 Multifunctional settings INPUT menu With the INPUT menu, items shown in the table below can be performed. Choose an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description Using the buttons / switches the mode for color space. AUTO RGB SMPTE240 REC709 REC601 COLOR SPACE · This item can be chosen only at a RGB signal or a component video signal. AUTO NTSC PAL SECAM N-PAL M-PAL NTSC4. 43 · This item performs only at a video signal from the VIDEO port or the S-VIDEO port. For a component video signal, the signal type is identified automatically, independently of this function. an irregular picture, a color lack), please select the mode depending on the input signal. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU :SELECT COLOR SPACE AUTO VIDEO FORMAT AUTO FRAME LOCK TURN OFF INFORMATION VIDEO FORMAT 32 Multifunctional settings INPUT menu (continued) Item Description Using the buttons / turns the frame lock function on/off. TURN ON TURN OFF · This item performs only at a RGB signal with vertical frequency of 50 to 60 Hz. · When the TURN ON is selected, a moving picture is displayed more smoothly. · This function may cause a certain degradation of the picture. Choosing this item displays a dialog titled "INPUT INFORMATION". INFORMATION INPUT-INFORMATION RGB 1024x768 @60. 0 FRAME LOCK INPUT-INFORMATION S-VIDEO SECAM AUTO FRAME LOCK · The "FRAME LOCK" message on the dialog means the frame lock function is working. (33) · This item can't be chosen at no signal. 33 Multifunctional settings SETUP menu With the SETUP menu, items shown in the table below can be performed. Choose an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item ZOOM Description Using the buttons / adjusts the zoom (magnifying power). [. . . ] (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code `06H' to the computer. Using the projector default settings (Reset Command) (1) The computer sends the default setting code Header + Command data (`06H'+ `00H' + type (2 bytes) +`00H'+`00H') to the projector. (3) The projector returns the response code `06H' to the computer. [. . . ]