User manual HITACHI CP-AW250N

[. . . ] Projector CP-AW250N User's Manual (detailed) Operating Guide (Type nos. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] Press the cursor (or the ENTER) button to display the selected template, and press the cursor button to close the displayed screen. The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed (57). TEST PATTERN ó DOT-LINE1 ó DOT-LINE2 ó DOT-LINE3 MAP2 ó MAP1 ó CIRCLE2 ó CIRCLE1 ó DOT-LINE4 You can turn a map upside down and scroll it horizontally when MAP1 or MAP2 is selected. To invert or scroll the map, display the guidance by pressing the RESET button on the remote three seconds or more when MAP1 or MAP2 appears. SOURCE NAME (Continued) TEMPLATE (continued on next page) 51 SCREEN menu Item Description The C. C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C. C. DISPLAY Select Closed Caption DISPLAY setting from following options using / buttons. AUTO ó ON ó OFF AUTO : Closed Caption automatically displays when the volume is muted. · The Closed Caption is the function to display the dialogue, narration, and / or sound effects of a television program or other video sources. The Closed Caption availability is depending upon broadcaster and/or content. MODE Select Closed Caption MODE setting from following options using / buttons. TEXT : Display Text data, which is for additional information such as news reports or a TV program guide. CHANNEL Select Closed Caption CHANNEL from following options using / buttons. 1ó2ó3ó4 1: Channel 1, primary channel / language 2: Channel 2 3: Channel 3 4: Channel 4 The channel data may vary, depending on the content. (Closed Caption) 52 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item Description Using the / buttons turns on/off the automatic signal search function. ON ó OFF When the ON is selected, detecting no signal automatically cycles through input ports in the following order. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1 ð COMPUTER IN2 ð LAN ð USB TYPE A VIDEO S-VIDEO HDMI USB TYPE B · It may take several seconds to project the images from the USB TYPE B port. ON ó OFF When set to the ON, the lamp in projector will be automatically turned on without the usual procedure (18), only when the projector is supplied with the power after the power was cut while the lamp was on. · This function does not work as long as the power has been supplied to the projector while the lamp is off. [. . . ] Perform picture adjustments by changing the COLOR TEMP, COLOR, TINT and/or COLOR SPACE settings, using the menu functions. Change the COLOR SPACE setting to AUTO, RGB, SMPTE240, REC709 or REC601. The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. [. . . ]