User manual HITACHI CDS225W
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HITACHI CDS225W. We hope that this HITACHI CDS225W user guide will be useful to you.
Manual abstract: user guide HITACHI CDS225W
Detailed instructions for use are in the User's Guide.
[. . . ] Liquid Crystal Projector
Thank you for purchasing this liquid crystal projector. WARNING · Please read the accompanying manual "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. [. . . ] Select an item with the and buttons, and start operation.
SETUP AUTO RGB VIDEO HDTV INPUT IMAGE EXECUTE CANCEL OPT.
Table 5. Input Menu Item Description
Operation Start/Stop: Press the / button. Automatic Adjustment at RGB Input: Select the EXECUTE with the button. Horizontal position (H. POSIT), vertical position (V. POSIT), clock phase (H. PHASE), and horizontal size (H. SIZE) are automatically adjusted. Use with the window at maximum size in the application display.
· This operation requires approximately 10 seconds. · This function is the same as for the AUTO function in Basic operation.
AUTO
RGB
Displays RGB Input Frequency: Displays the horizontal and vertical sync signal frequencies for RGB input.
· Valid only at RGB input.
VIDEO
Operation Start/Stop: Press the / button. Select Video Signal Type: Select the signal type with the and buttons. Select NTSC, PAL, SECAM, NTSC4. 43, M-PAL, or N-PAL as appropriate for the input signal. The selection of AUTO enables and executes the function AUTO (Automatic Adjustment at Video Input), except for the N-PAL input.
· Use this function when the image becomes unstable (eg. Pressing the AUTO button in this case may correct this problem except for the N-PAL input. · For the COMPONENT VIDEO input, this function is not effective and the signal type is distinguished automatically.
HDTV
Operation Start/Stop: Press the / button. Select HDTV Mode: Select the 1080i mode or 1035i mode suitable for the input signal with the / button.
· When the selected HDTV mode is incompatible with the input signal, the image may be incorrect (eg. the display position or color is incorrect).
ENGLISH-12
OPERATIONS (continued)
SETUP INPUT IMAGE OPT.
The following adjustments and settings are available when IMAGE is selected on the menu. Select an item with the and buttons, and start operation.
BLANK MIRROR START UP GAMMA COLOR TEMP
Table 6. Image Menu Item
BLANK MIRROR
Description
Select Blank Screen Color: Select color with the and buttons.
· The image is cleared when the BLANK mode is set with BLANK ON, or when there is no signal, and the entire screen is displayed in the selected color.
START UP
Operation Start/Stop: Press the / button. Clear Initial Screen Display: Select TURN OFF with the button.
· Note that if TURN OFF is selected the blank screen is displayed in blue when there is no signal.
GAMMA COLOR TEMP
Operation Start/Stop: Press the / button. Select Gamma Mode : Select the gamma mode with the
/
button.
Operation Start/Stop: Press the / button. Select Color Temperature: Select the color temperature mode with the / button.
ENGLISH-13
ENGLISH
Image Menu
OPERATIONS (continued)
Options Menu
The following adjustments and settings are available when OPT. Options Menu Item
VOLUME MENU COLOR LANGUAGE
Description
Volume Adjustment: Reduce VOLUME
Increase VOLUME
Select Menu Background Color: Select with the Operation Start/Stop: Press the or button. The system automatically enters the standby mode when a signal is not received for the set time. When STOP is selected the system does not enter the standby mode even if no signal is received. SYNC ON G Invalid: Select TURN OFF with the button.
· May not be displayed correctly with some input signals when SYNC ON G is valid. [. . . ] NO INPUT IS DETECTED ON ***
SYNC IS OUT OF RANGE ON ***
CHECK THE AIR FLOW
NOTE *1) This message is cleared automatically after approximately three minutes, and appears every time power is switched ON.
ENGLISH-19
ENGLISH
OSD Message
TROUBLESHOOTING (continued)
Indicators Message
The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Indicators Message
POWER LAMP TEMP indicator indicator indicator
Lights orange Blinks green Lights green Blinks orange Blinks red
Contents
Turns off Turns off The Standby mode has been set. Take the appropriate measures when the POWER indicator ceases blinking Lamp is not lit. Switch power OFF, wait 20 minutes until the equipment cools, and check whether the Turns off ventilation openings are blocked, whether the air filter is dirty, or whether the ambient temperature exceeds 35 °C. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CDS225W
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CDS225W will begin.