User manual HITACHI C2170TN

[. . . ] 15 To delete a channel from a programme number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 To insert a channel into a programme number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 APS (Automatic Programming System):16 TV Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In case of bilingual broadcast, you can select original or dubbed language again using mode menu. So when somebody listens to the original language from the loudspeakers, somebody else can listen to the dubbed language from headphone. The stored values will be valid for all the programmes. Setting Sound Effect: You can use this feature to switch on and off sound effect. If the current sound system is MONO and the sound effect is set ON, then the sound will be heard as if it is STEREO. If the current sound system is STEREO, switching this effect on will make the sound deeper. Switching it off will make no change in MONO and STEREO. GB - 12 - Picture Menu To change picture settings: Enter the Picture Menu directly, pressing the GREEN button or, Press MENU button, now you are in main menu. In the main menu, select PICTURE using or button, then enter the picture menu pressing or button. Setting Brightness: As you enter the picture menu, Brightness will be the first selected option. button to decrease brightness. Setting Contrast: Using Press Press or button select Contrast. button to decrease contrast level. Setting Sharpness: Using Press Press or button select Sharpness. button to decrease sharpness level. Setting Colour: Using Press Press or button select Colour. After that select and change the other letters as well in order to name the programme correctly. Finally to store the name, select store option or using or button and store it pressing button. To change Standard (You can change this menu only between standards which your TV set supports. ) Pressing or button selects the Broadcast Standard required. When changing the pressing standard this way, if the previous channel is not defined for the new selected standard, then also the channel will be changed to the first defined channel of that standard (For example: When changing BG to K1 and the previous channel is C12, after changing the standard, the channel will be C4, because the first defined channel of standard K1 is C4). After that, if it is returned to the previous standard back, the channel will not be changed to the previous one anymore (That means, in the example above, when it is returned from K1 to BG again, the channel will not change to C12 anymore and keep C4). Defined channels for different standards are given as following: B/G : C01-C69, S01-S41 D/K : C01-C12, C21-C69, S01-S19, S22-S41 I* : C21-C69 I** : C01-C17, C21-C69, S01-S19, S22-S41 L/L : C01-C11, C21-C69, S01-S41 K1 : C04-C09 * U. K. I (UHF) ** IRELAND I (VHF, UHF) Direct Channel Access If you know the broadcast band and channel number of the station you want to tune, you do not need to make search; select Band, using or button in the TUNING menu. Press button to find the channel number or directly type it using the digit buttons. As you change the channel numbers the corresponding stations will be displayed. To store the station to the programme number selected, select STORE option using or button and or button to store it. then press Fine Tuning Picture or sound quality can be poor in areas where the receptions is weak. [. . . ] If the programme being watched does not have Teletext transmission, only a blue box will be displayed at the same location. When time information is displayed on screen, entering another menu will remove it, but after leaving that menu time information will appear again. No solution: Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself. Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? [. . . ]