User manual HITACHI AX-M136I

[. . . ] The operating instructions should be retained for future reference. For your safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Laser Product This product is equipped with low power laser equipment. For your own safety do not remove any covers or take the product apart. Repair work must be carried out by qualified personnel. CLASS 1 LASER PRODUCT This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Caution: This product is equipped with low power laser equipment inside, for your safety, don't open the laser radiation protective equipment. [. . . ] If there are available DAB services, the system will store all detected stations. At completion of the scanning, the system will tune to a station on the list. Tuning to a station 1. Press the Reverse/ Fast Forward buttons (D/C) to select the desired station from the list. - 11 - Re-tuning By re-tuning, you can update your DAB ensemble list all over again. At the completion of scanning, the system will tune to the first service of the first ensemble in the updated ensemble list. * Press and hold the Scan button (INTRO/SCAN) for 2 seconds or more, the system will start full scan to search for all available Band lll channels again automatically. * Press the Scan button (INTRO/SCAN) briefly, the system will start a quick scan process to search for Band lll channels again automatically. Press and hold the Play/Pause button (BF) for more than 2 seconds to enter the manual tuning mode. Press the Reverse/ Fast Forward buttons (D/C) to select your desired DAB channels backward/forward. Press the Play/Pause button (BF) to confirm and tune to your selected channel. Programming DAB Stations You can save up to 20 DAB stations in the system memory. Press the Reverse/ Fast Forward button (D/C) to select your desired DAB channels. Press the Play/Pause button (BF) to confirm, and tune to your selected channel. Press the Program button (PROG) and then press the Previous/ Next buttons (H/G) to select a location for storing your desired station. You can also use the Number buttons (0-9) to input a number directly and tune to the service associated with this number. If the number is larger than 10, press the Number button (10+) once or more to select the first digit you want and then use the Number buttons (0-9) to input the second digit. Press the Program button (PROG) again for confirmation until "P # SAVED"(# indicating the preset number your selected) display. * * * Tuning to Preset DAB Stations Press the Previous/ Next buttons (H/G) until the desired preset station is displayed. You can also use the Number buttons (0-9) to input a number directly and tune to the service associated with this number. To input a number larger than 10, press the Number button (10+) once or more to select the first digit you want and then use the Number buttons (0-9) to input the second digit. DAB Information Display You can view the DAB service information in the following modes. Depending on the DAB radio station you are tuning to, some information modes may be unavailable. Press the Display button (DISPLAY) repeatedly to view the following information. [. . . ] Press the same button again, the "OFF" indicator will blink. Then set the daily timer to "ON" (daily timer set is in effect) or "OFF" (daily timer set is to cancel) by pressing the Volume Down button (VOL-) or Volume Up button (VOL+). * The operating time of every step shouldn't be longer than 3 seconds or it will return to time display. * The sound source on the automatic on mode is the same as the sound source the last time, the unit was turned off by the standby switch. [. . . ]