User manual HITACHI 42PD6700U

[. . . ] Instructions for use GB 42PD6700U Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 9 Inserting Batteries In The Remote Control Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 To Select Teletext With A TV Programme 28 To Reveal Concealed Information . . . 29 Search For And Store The Test Signal Of The Video Recorder . . . . . . . . . . . . . . . . . . . . . . [. . . ] Set your VCR to correspond with the time set TV Setup To be able to go through TV functions, you can use this item. Press the button to display the main menu and or button to highlight TV Setup, use - 17 - press the OK button to display TV Setup menu screen. Detailed information about Sound, Picture and Feature menus are in AnalogueTV Menu System section on page 18. Common Interface Press the button to display the Main Menu and use the or button to highlight the Common Interface line and press the OK button. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. Please set the CAM by entering the IDTV menu, Common Interface then pressing the SELECT button. (CAM set up menu is not displayed when it is not required. ) To see the viewing contract information: It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting. Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay channel company, then insert those to the Television using the following procedure. Insert the CAM, then Viewing Card to the slot that is located in the terminal cover at the left-hand side of the TV (from front view). The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Enter IDTV; press the button, then highlight Common Interface and press the OK button. When no module is inserted, No Common Interface module detected message appears on the screen. Refer to the module instruction manual for details of the settings. Analogue TV Menu System Your TV has been designed with a menu system to provide easy manipulation of a multifunction system. Press the Press _ / ` button to select a menu title and then a / b button to select a menu item and _ / ` or OK button to enter the menu item. button to return to the previous - 18 - Picture menu By pressing _ / ` button, select the first icon. Picture menu appears on the screen. Colour By pressing a / b button, select Colour. Hue This item is displayed in picture menu when the TV receives an NTSC signal. Press _ / ` button to choose one of these options: Cool, Normal and Warm. Noise Reduction This item is used to reduce the image noise and improve the picture quality at weak signals. Press _ / ` button to set Noise reduction level to Off, Low, Medium or High. Film Mode Films are recorded at a different number of frames per second to normal television programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly. 3D Comb 3D Comb is used to improve colour transitions and colour quality of pictures. [. . . ] (See the booklet for your video recorder. ) Enter the Install menu and select search. Search for the test signal of your video recorder in the same way as you searched for and stored the TV signals. Replace the aerial cable in the aerial socket of your video recorder once you have stored the test signal. Camera And Camcorder To Connect To AV Input Connect your camera or camcorder to AV (AV-4) input at the rear side of the TV. Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. [. . . ]