User manual HITACHI 32LD30UA

[. . . ] 32LD30UA 32LD30UB Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the EXIT button on the remote control to exit. AC3 Audio (**for EU countries only) In the Configuration Menu, highlight the AC3 Audio item by pressing " " or " " buttons. Use the " " or " " buttons to set the AC3 Audio as On or Off. If the channel that you are watching supports AC3 Audio, turn this setting on. Hard of Hearing (**for EU countries only) Use " " or " " button to select Hard of Hearing and then press " " or " " button to set this setting as On or Off. If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals. Favourite Mode This function enables or disables the 5 favourite channel list mode by pressing " " or " " buttons and OK. If a favourites list exists, it will switch to the list number selected. If there is no favourite listing, a warning message will be displayed. Channel List TV Setup You can use this item to display the TV functions. Press the "M" button to display the main menu and use " " or " " button to highlight "TV Setup", press the "OK" button to display TV Setup menu screen. You can find detailed information for all menu items in "Analogue TV Menu System" section. Setup The adjustments in this menu are given as the following: Use " " or " " buttons to go to Channel List option. Use " " or " " buttons to toggle Channel List Mode. If you select "TV Only", with the " " or " " buttons, you navigate through only TV channels. If you select "Radio Only", with the " " or " " buttons, you navigate through only radio channels. If you select "Text Only", with the " " or " " buttons, you navigate through only text channels. Scan Encrypted Scan Encrypted Channel feature will always be ON after performing first time installation. When this setting is on, search process will locate the encrypted channels as well. Select Configuration from Setup menu and press OK English - 25 - set as OFF manually, encrypted channels will not be located while in automatic search or manual search. Use " " or " " button to select Scan Encrypted and then press " " or " " button to set this setting as On or Off. Receiver Upgrade Over Air Download (OAD) To ensure that your TV always has the most update information, use this setting. each day and searches for any new information which may be broadcast and will download this to your receiver automatically. and you do not want to interrupt it, disable auto OAD search by performing the following: · Highlight "Scan for upgrade" menu with " " or " " keys and pres OK to commence upgrade. · After the search progress is completed, the message " Completed searching for upgrade. [. . . ] To avoid this, do not leave a still picture on the screen for extended periods. Input Sources If you cannot select an input source, it is possible that no device is connected. Check the AV cables and connections if you have tried to connect a device. No Power If your TV system has no power, please check the main power cable and connection to the mains socket outlet. Poor Picture Have you selected the correct TV system?Is your TV set or house aerial located too close to a non-earthed audio equipment or neon lights, etc. ?Mountains or high buildings can cause double pictures or ghost images. [. . . ]