User manual HITACHI 17LD4220U

[. . . ] Gebruiksaanwijzing Instructions for use NL GB DK D 17LD4220U Instruktionsbog Bedienungsanleitung Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation Of The TFT TV To The Wall 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Inserting batteries in the remote control handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Automatic Programming System) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] or, Press , or OK button on Store option to store Install menu settings. Installation menu in AV mode is as follows. , QVWDOO Q!8"%8"%!$! Selecting Band Band, can be chosen either, C or S by or button. Selecting Channel Channel can be changed by or button, by Digit Buttons or by the Double Digit button with digit buttons. Selecting Search To start the search process, press button for forward search or button for backward search. If a signal is found or reaches to end of the band after searching, press or buttons to continue search process. Selecting Fine Tuning You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen. Use or button on Fine Tuning item, until getting the best image on the screen. Normally the Fine Tuning cursor is placed next to the left side on the slider and this is indicated with one arrow. 2Q Programme Menu To enter Programme menu directly, press the " " button in TV mode, or Press "M" button, now you are in main menu. Then enter the Programme menu, press / or OK button. - 18 - 0HQX gramme name. Insert section is for inserting programmes into another programme spaces. Name: To change the name of a programme, select the programme and then press the RED (Name) button. To change that letter or button can be used, and to select the other letters, or button can be used. If the cursor is at the last letter of the Programme Name, pressing button moves the cursor to the beginning. On the contrary, if the cursor is at the beginning of the Programme Name, pressing button moves the cursor to the end. After activating the name p r o c e s s t h e I n s e r t , D e l e t e a n d Autostore processes will be inactive and "Cancel" option will be valid. If you do want to store the new name, press the BLUE (Cancel) button. By moving the cursor in four directions, you can reach 20 programmes in the same page. By scrolling the pages up or down by pressing the navigation buttons you can select all the programmes in TV mode (except the AV mode). It is also possible to select programme by using digit or doubledigit button. When using double-digit button in order to select a programme, the Programme Number in TV Status OSD is displayed in "P --" form, and by pressing digit buttons they are displayed in it. After autostore process the Programme Names are set to: Channel search "C-01" or "S-01" (band and channel number) or name of the tuned channel if defined. QthQ! 6WRUH &DQFHO Insert: When the Green (Insert) button is pressed, "Name", "Autostore" and "Delete" functions are erased, the selected programme (A) is displayed with an arrow. With navigation buttons, the decided programme space (B) can be selected and by pressing the green button again the selected programme will be inserted. Press Blue button to activate "Cancel" function of "Insert" process. [. . . ] Sometimes you can improve the picture quality by changing the direction of the aerial. The picture quality may degrade when two peripherals are connected to the TV at the same time. For Monitor : Check that Video (Signal) Cable from the Display has been securely and correctly connected to the 15-pin Video Connector on the rear panel of the Computer. If you have used an adaptor to convert the 15-pin Video (Signal) Cable Connector from the Display to fit the connector on the rear of the Computer, check the pin assignment of the Display. Sound You can not hear any sound. [. . . ]