User manual HITACHI POWER TOOLS HU12 ELECTRIC TOOL PARTS LIST

[. . . ] The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. 4 5 ∅ 3mm 12 Description of the appliance Control panel GB POWER Indicator light REFRIGERATOR OPERATION Knob SUPER COOL Indicator light SUPER FREEZE Indicator light FREEZER OPERATION Knob SUPER COOL Button SUPER FREEZE Button • REFRIGERATOR OPERATION Knob to regulate the temperature of the refrigerator compartment. € SUPER COOL (quick cool) to lower the temperature of the refrigerator compartment rapidly. [. . . ] Do not block the aeration cells by placing food or containers in direct contact with the refrigerating back panel. If the word “OK” does not appear it means that the temperature is too high: adjust the REFRIGERATOR OPERATION knob to a higher position (colder) and wait approximately 10 hours until the temperature has been stabilised. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before adjusting the REFRIGERATOR OPERATION knob to a higher setting. 15 GB Using the refrigerator to its full potential • Use the REFRIGERATOR OPERATION knob to adjust the temperature (see Description). € Press the SUPER COOL button (rapid cooling) to lower the temperature quickly. For example, when you place a large number of new food items inside a fridge the internal temperature will rise slightly. The function quickly cools the groceries by temporarily reducing the temperature until it reaches the ideal level. € Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips). They will increase humidity in the refrigerator and cause condensation to form. GB Cleaning the appliance • The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. € The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance. Replacing the light bulb To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (15W or 25W). Avoiding mould and unpleasant odours • The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. € If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open. The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. [. . . ] € • • • The doors do not close properly or the seals are damaged. € The REFRIGERATOR OPERATION knob is not on the correct setting (see Description). € The food is in contact with the back inside wall of the refrigerator. € The SUPER FREEZE button has been pressed (rapid freezing): the yellow SUPER FREEZE light is on or flashing (see Description). [. . . ]