User manual GRASS VALLEY T2 1.31 RELEASE NOTES

[. . . ] T2 INTELLIGENT DIGITAL DISK RECORDER Release Notes Software Version 1. 31 (January 2011) www. grassvalley. com Grass Valley Product Support For technical assistance, to check on the status of a question, or to report a new issue, contact Grass Valley Product Support via e-mail, the Web, or by phone or fax. Web Technical Support To access support information on the Web, visit the product support Web page on the Grass Valley Web site. [. . . ] HPFS, Linux). Anti-virus software You cannot install anti-virus software on the T2. It is good practice to not connect it to the internet and to make sure that any DVD media, USB or FireWire device connected to the T2 has been virus-scanned prior to connecting it. Importing/Exporting data during recording or playback Importing or exporting data via USB, IEEE1394 (FireWire) or FTP while using all 3 channels simultaneously in Full HD may affect Recording and Playback. We strongly recommend not using the transfer function while all 3 channels are in use. Update History The following issues are fixed in this version. An error occurs when recorded clip is exported to USB storage Description An error occurred when a clip recorded via DVI was exported to USB storage. Transfer error occurs during MXF export Description Transfer error occurred during MXF export. Cannot capture ancillary data Description T2 could not capture ancillary data. T2 unexpectedly quits if MXF export job is cancelled Description If a long duration AVI was being exported to MXF and it was cancelled, the T2 unexpectedly quit. T2 unexpectedly quits if current bin is changed Description If a folder which contains a playlist was chosen to change the current bin, the T2 would unexpectedly quit (only occurred in Front Panel mode). Some operations cannot be applied to an R1 clip Description Following operations could not be applied: - Renaming clip via tapping text box - Unloading menu - Renaming menu - Opening menu property Cannot load 23. 98p clip if 23. 98PsF reference is input Description A 23. 98p clip cannot be loaded if a 23. 98PsF reference signal is present. TheT2 cannot then be operated until the reference cable is disconnected. MXF export continues even if destination has no free space Description MXF export continues even after destination drive has no free space. [. . . ] None An error occurs when recorded clip is exported to USB storage Description Workaround An error occurs when a clip which is recorded via DVI is exported to USB storage. [. . . ]