User manual GRACO GUN FLUSH BOX 309227F

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GRACO GUN FLUSH BOX. We hope that this GRACO GUN FLUSH BOX user guide will be useful to you.


GRACO GUN FLUSH BOX 309227F: Download the complete user guide (990 Ko)

Manual abstract: user guide GRACO GUN FLUSH BOX309227F

Detailed instructions for use are in the User's Guide.

[. . . ] Electrostatic Gun Safety D Do not flush the system with the gun electrostatics turned on. D Interlock the gun turbine air supply to prevent operation of the power supply during flushing. D Do not turn on the gun electrostatics until all solvent is removed from the system. D When cleaning, flushing, or purging electrostatic equipment, use solvents that comply with your local regulations. [. . . ] Install the 198405 gun holder with the appropriate gun name facing forward. Location Locate the Gun Flush Box in an area easily accessible to the operator and away from the spray or application point, to help avoid getting over-spray on it. For PRO Xs3 and PRO Xs4 Guns, install 198405 Gun Holder with appropriate gun name facing forward. Mounting The Gun Flush Box can be wall, stand, or drum mounted in the spray booth. Install the gun flush box(es), using the mounting holes as a template. Make sure the mounting surface will withstand the weight of the Gun Flush Box, hoses, and the stress of operation. GH (198405 shown) PROXS3 41, 8 14 in. 1 6 309227 PROXS4 Installation Enclosed Waste Container Grounding WARNING TOXIC FLUID HAZARD To reduce the risk of splashing, a minimum of two feet (0. 6 m) of straight plastic or grounded metal pipe or tubing must be connected between the Gun Flush Box and an enclosed waste container for the solvent. Connect two feet (0. 6 m) of straight plastic or grounded metal pipe or tubing (T) between the Gun Flush Box fluid outlet (O) and an enclosed waste container (W). 3. WARNING FIRE, EXPLOSION, AND ELECTRIC SHOCK HAZARD To reduce the risk of fire, explosion, or electric shock, the system must be properly grounded. Ground your system as instructed in the manuals included with your equipment. Gun Flush Box: Connect a ground wire to the grounding lug (A) on the box. Waste Container: Connect a ground wire and clamp between the waste container and a true earth ground. Spray Gun: See your gun instruction manual. O T W Flammable Liquids in the spray area must be kept in approved, grounded containers. 4 309227 7 Installation Typical Installation of Gun Flush Box in PrecisionMix System Fig. 5 8 309227 Installation Connect Tubing to the Pneumatic Controls Fig. The four bulkhead fittings are labeled: P = Supply air in A = Return air (for the gun in the box) C = Gun trigger cylinders air (activates the gun trigger) S = Safety interlock (locks out the atomizing air) See Fig. 7 for detailed information on the Gun Flush Box internal pneumatics. INSTRUCTIONS 4. Connect a 5/32" (4 mm) OD tube between the air supply and the P bulkhead. Use a clean, dry air supply; filtered to 10 microns. WARNING EQUIPMENT MISUSE HAZARD Do not exceed 100 psi (0. 7 MPa, 7 bar) maximum air pressure. 5. Connect a 5/32" (4 mm) OD tube between the A bulkhead and the return air input on the controller. Connect a 5/32" (4 mm) OD tube between C bulkhead and the gun trigger solenoid output on the solenoid box or the Gun Flush Box control box. Adjust the block as instructed in Trigger Height Adjustment procedure on page 10. Check the air supply and tubing. Tubing is not installed correctly. Gun trigger is not open when the Gun Flush Box controller activates it. Lower cylinder is out of adjustment. Lid switch or gun switch failure. [. . . ] Any action for breach of warranty must be brought within two (2) years of the date of sale. Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc. ), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GRACO GUN FLUSH BOX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GRACO GUN FLUSH BOX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.