Detailed instructions for use are in the User's Guide.
[. . . ] Follow the specific grounding instructions in the system and individual component manuals. The system may have special grounding requirements for the mix manifold. 223547, is available from Graco.
Grounding
Fluid Connections
See FIG. Connect the solvent supply line to the 1/4 npt(f) solvent purge valve (SPV) inlet. [. . . ] Do not open sampling valves unless fluid shutoff valves are closed.
Sampling
TI11581a
FIG. Dispense Valve Adjustment
Maintenance
Weekly
· To reduce the risk of injury, including fluid injection, follow the Pressure Relief Procedure in your proportioning equipment manual before cleaning, checking, or repairing equipment. Clean and inspect fluid and air filters.
·
Daily
· · Purge the mixing system at the end of production. To reduce the risk of injury, including fluid injection, follow the Pressure Relief Procedure in your proportioning equipment manual before cleaning, checking, or repairing equipment. NOTE: Another method of removing spring pressure is by applying air to the ON port, to lift the valve needle off the seat.
NOTICE Purge the mix manifold with solvent after repair to remove any excess grease that is used for lubricating parts. Parts included in the kit are marked with a symbol, for example (31*). Remove the screw seal (37) and o-ring (39) from the manifold body (1). Pull the mixer assembly (35, 46, and 48) out the bottom of the manifold. Lift the adapter (17) and valve (19) off the shutoff valve manifold (11 or 36). Before performing step 11, install the new o-ring (18*) and screw the valve (19) securely into the adapter (17). Reconnect the fluid and air lines.
Repair the Valves and Seats
Valve Seat Kit 24A861 is available. Relieve pressure.
10
312781B
Repair
Rebuild the Mix Manifold
Manifold Rebuild Kit 15U931 is available. Install the o-ring (13*), backup (14*), shutoff valve handle (12), and retaining ring (22) on each side. Reconnect the fluid and air lines.
312781B
11
Parts
Parts
Part No. 289695
21 49 31 48 Detail of Ratio Check Kit (53), shown installed on ProMix 2KS Fluid Manifold
1
Apply pipe sealant to all pipe threads when reassembling.
47 53
19 46 31* 1 20 39* 11 38 5* 44 43 41 42 45* 33 17 15* 16 15* 36 23 15*16 39* 37 29 30 32 52 28 25 40* 35 31* 12 22 3 33 20 24 13* 14* 15*
TI14819a
18*
17 18* 19
TI11578a
12
312781B
Parts
Part No. 1 3 5* 11 12 13* 14* 15* 16 17 18* 19 20 21 22 23 24 25 28 29 30 Part No. --15T592 ----15T573 --------15T600 --15X303 C20010 118823 110082 101950 15D430 118822 118830 118831 101885 Description Qty BODY, manifold integrator 1 PLUG, integrator manifold 1 O-RING; ptfe 2 MANIFOLD, shutoff valve A 1 HANDLE, shutoff valve 2 O-RING; pfe 2 O-RING, back-up; ptfe 2 O-RING; ptfe 8 SEAT, valve needle, high pressure 4 ADAPTER, valve, dose 4 O-RING; ptfe 4 VALVE, dispense; includes item 18; 4 see manual 312782 SCREW, cap, socket-hd; 5/16-24 x 8 1/2 in. (13 mm) TUBE, outlet 1 RING, retaining, internal 2 SCREW, cap, socket-hd, 1/4-20 x 8 2-1/2 in. (64 mm) TUBE, static mixer 1 ELEMENT, static mixer 2 CLAMP, body, integrator tube 2 COVER, clamp, integrator tube 1 SCREW, cap, socket-hd; 1/4-20 x 2 1-3/4 in. (44 mm) O-RING; ptfe 3 ELBOW, connector, tube; 1/8 2 npt(m) x 5/32 in. (4 mm) OD tube PLUG, pipe, headless 4 BASE, integrator 1 MANIFOLD, shutoff valve B 1 SEAL, screw 1 SEAL, screw 1 O-RING; tfe 2 O-RING; ptfe 1 Ref. 41 42 43 44 45* 46 47 48 49 52 53 * Description Qty VALVE, pressure, bleed 2 ELBOW, street; 1/4 npt (m x f) 1 VALVE, check 1 FITTING, connector, tube; 1/4 1 npt(f) x 1/4 in. [. . . ] GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc. ), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise. [. . . ]