User manual GRACO BEACON TOWER INSTRUCTIONS PARTS

[. . . ] Instructions-Parts Beacon Tower Not for use in explosive atmospheres. 313542C ENG Diagnostic indicator for use with ProMix® 2KS Proportioner. For professional use only. Important Safety Instructions Read all warnings and instructions in your ProMix 2KS installation, operation, and repair manuals. [. . . ] Feed the wires through the hole and secure the beacon (1) with jam nuts (N) on the inside and outside of the box. Install the header (5) on the din rail and connect the cable (4) to J5 on the EasyKey display board. To enable the optional audible alarm, connect sky blue wire to pin 6 on header. When beacon wiring is completed, insulate the end of each unused lead wire with insulation tape. + - N (-) NC NC L (+) Yellow (+24V) TI14041a FIG. 2: Power Terminal Connections 2 313542C Parts Parts 122193 Beacon Tower, includes item 1 only 15W034 Beacon Tower Kit, includes items 1-8 Ref Description 1 2 3 4 5 6 7 8 LIGHT TOWER, Part No. 122193 CONNECTOR, terminal, female CONNECTOR, 10 position WIRE HARNESS, 3 conductor with shield; 24 in. (0. 6 m) HEADER, 5 position, din rail mount CONNECTOR, 5 position DIN RAIL SCREW, machine; 6-32 x 1/4 in. (6 mm) Qty 1 3 1 1 1 1 1 2 OUTPUT DC 1 Mount din rail (7) in these holes, using two screws (8). 2, 3 Last Pin TI14039a 6 5 Pin 1 Pin 2 4 TI14038a FIG. 3: 15W034 Beacon Kit Parts 313542C INPUT AC TI12578a 3 Wiring Diagrams 122193 Beacon Tower (for Automatic Systems) Communications and I/O Harness 15W023 is included with Automatic Systems. Connection points inside the dashed line are already made in the EasyKey. 1 POWER DISTRIBUTION TERMINALS DISPLAY BOARD Wire Harness 15W023 FLOW CONTROL CAL. [. . . ] Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505 All written and visual data contained in this document reflects the latest product information available at the time of publication. MM 313542 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. [. . . ]