User manual GIGABYTE MNNM1PI

[. . . ] MNNM1PI Intel® mini-ITX Motherboard USER’S MANUAL Intel® mini-ITX Motherboard Rev. 1001 * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!The WEEE marking applies only in European Union's member states. * Copyright © 2010 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. [. . . ]  Dispose of used batteries according to the manufacturer’s instructions. 17 ) CLR_CMOS (Clear CMOS jumper) You may clear the CMOS data to its default values by this jumper. 1 1 1-2 close: Normal operation (Default setting) 2-3 close: Clear CMOS 21 MNNM1PI Motherboard Chapter 3 BIOS Setup BIOS (Basic Input and Output System) includes a CMOS SETUP utility which allows user to configure required settings or to activate certain system features. The CMOS SETUP saves the configuration in the CMOS SRAM of the motherboard. When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS SRAM. ENTERINGSETUP When the power is turned on, press the <DEL> button during the BIOS POST (Power-On Self Test) will take you to the CMOS SETUP screen. You can enter the BIOS setup screen by pressing "Ctrl + F1". CONTROLKEYS <> <> <> <> <Esc> Move to previous item Move to next item Move to the item in the left hand Move to the item in the right hand Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu <+/PgUp> Increase the numeric value or make changes <-/PgDn> <F1> <F2> <F3> <F4> <F6> <F7> <F8> <F9> <F10> Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Change color Change color Reserved Reserved Discard Changes Reserved Load the Optimized Defaults Save all the CMOS changes 22 MNNM1PI Motherboard GETTINGHELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. Select the Load Setup Defaults item in the BIOS Exit Setup menu when somehow the system is not stable as usual. This action makes the system reset to the default settings for stability.   Main This setup page includes all the items in standard compatible BIOS. Advanced This setup page includes all the items of Phoenix BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters. )      PCI/PnP Use this menu to for advanced PCI/PnP settings. Boot This setup page include all the items of first boot function features. Security Change, set, or disable password. It allows you to limit access the system and setup. Chipset Northbridge and Southbridge additional features configuration. Exit There are five options in this selection: Exit Saving Changes, Exit Discarding Changes, Load Optimal Defaults, Load Failsafe Defaults, and Discard Changes. 23 MNNM1PI Motherboard Main Once you enter AMI BIOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu. Main Advanced PCIPnP Boot BIOS SETUP UTILITY Security Chipset Exit System Overview AMI BIOS Version: MNM1PIS. f2a/08. 00. 15 Build Date: 05/20/10 ID: 1IPT9000 Processor Intel(R) Atom(TM) CPU K410 Speed: 1666MHz System Memory Size: 2054MB System Time System Date [10:10:58] [Fri 06/11/2010] @ 1. 66GHz   +Tab F1 F10 ESC Select Screen Select Item Change Field Select Field General Help Save and Exit Exit v02. 61 (C) Copyright 1985-2006, American Megatrends, Inc. BIOS Information Version: displays the BIOS version. ID: displays the BIOS ID information. Processor Information CPU Type: displays the installed CPU type. Speed: displays the installed CPU speed. Memory Information Size: The BIOS determines how much available memory is present during the POST. System Time The time is calculated based on the 24-hour military time clock. Note that the “Day” automatically changed after you set the date. 24 MNNM1PI Motherboard Advanced About This Section: Advanced With this section, allowing user to configure your system for advanced operation. The advanced menu includes sub-menu of CPU Configuration, IDE Configuration, Floppy Configuration, Super IO Configuration, Hardware Health Configuration, ACPI Configuration, MPS Configuration, and USB Configuration. Main Advanced PCIPnP Boot BIOS SETUP UTILITY Security Chipset Exit Advanced Settings WARNING: Setting wrong values in below sections may cause system to malfucntion. CPU Configuration IDE Configuration Super IO Configuration Hardware Health Configuration ACPI Configuration USB Configuration   +Tab F1 F10 ESC v02. 61 (C) Copyright 1985-2006, American Megatrends, Inc. Select Screen Select Item Change Field Select Field General Help Save and Exit Exit 25 MNNM1PI Motherboard CPU Configuration Main Advanced PCIPnP Boot BIOS SETUP UTILITY Security Chipset Exit CPU Configuration Module Version: 3F. 15 Manufacturer: Intel Intel (R) Atom(TM) CPU K410 Frequency :1. 66GHz FSB :666MHz Cache L1 :24KB Cache L2 :512KB Ratio Actual Vaule : 10 Max CPUID Value Limit Execute-Disable Bit Capability @ 1. 66GHz [Disabled] [Enabled]   +Tab F1 F10 ESC Select Screen Select Item Change Field Select Field General Help Save and Exit Exit v02. 61 (C) Copyright 1985-2006, American Megatrends, Inc. CPU Information This category includes all the information of CPU manufacturer, type, Frequency, FSB, L1/ L2 Cache, Ratio Status, and Ratio actual value Please note that setup menu options will be variable depends on the type of CPU. Max CPUID Value Limit When the computer is booted up, the operating system executes the CPUID instruction to identify the processor and its capabilities. Before it can do so, it must first query the processor to find out the highest input value CPUID recognizes. This determines the kind of basic information CPUID can provide the operating system. The maximum CPUID input value determines the values that the operating system can write to the CPUID's EAX register to obtain information about the processor. (Default setting) Disable Execute-Disable Bit function. Execute-Disable Bit Capability 26 MNNM1PI Motherboard IDE Configuration Main Advanced PCIPnP Boot BIOS SETUP UTILITY Security Chipset Exit IDE Configuration Configure SATA as Primary IDE Master Secondary IDE Master IDE Detect Time Out (Sec) [35] [IDE]   +Tab F1 F10 ESC v02. 61 (C) Copyright 1985-2006, American Megatrends, Inc. Select Screen Select Item Change Field Select Field General Help Save and Exit Exit Confiure SATA as ACHI When set to AHCI, the SATA controller enables its AHCI functionality. However, its RAID functions will be disabled and you won't be able to access the RAID setup utility at boot time. When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode. (Default setting) Disable the device. IDE Disabled Primary IDE Master, Slave The category identifies Serial ATA and IDE types of hard disk that are installed in the computer. Note that the specifications of your drive must match with the drive table. [. . . ] Select Screen Select Item Change Field Select Field General Help Save and Exit Exit Set Supervisor Password You can install and change this options for the setup menus. Type the password up to 6 characters in length and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory. You may also press <Esc> to abort the selection and not enter a specified password or press <Enter> key to disable this option. Set User Password You can only enter but do not have the right to change the options of the setup menus. [. . . ]