User manual GIGABYTE MD70-HB0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIGABYTE MD70-HB0. We hope that this GIGABYTE MD70-HB0 user guide will be useful to you.


GIGABYTE MD70-HB0 : Download the complete user guide (18685 Ko)

You may also download the following manuals related to this product:

   GIGABYTE MD70-HB0 (18387 ko)
   GIGABYTE MD70-HB0 ANNEXE 1 (19153 ko)
   GIGABYTE MD70-HB0 ANNEXE 2 (17991 ko)
   GIGABYTE MD70-HB0 ANNEXE 1 (17831 ko)

Manual abstract: user guide GIGABYTE MD70-HB0

Detailed instructions for use are in the User's Guide.

[. . . ] 1201 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b. gigabyte. com You are a professional? [. . . ] Default setting is COM1. (Note) Advanced items prompt when this item is defined. BIOS Setup - 50 - 2-2-2 PCI Subsystem Settings PCI Express Slot #1/#2/#3/#4/#5/#6 I/O ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Enable/Disable onboard LAN devices and initialize device expansion ROM. Default setting is Disabled. Onboard LAN#1/#2 Controller Onboard LAN #1/#2 I/O ROM PCI Devices Common Settings PCI Latency Timer VGA Palette Snoop Value to be programmed into PCI Latency Timer Register. Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160 PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks/. Default setting is Disabled. Above 4G Decoding - 51 - BIOS Setup SR-IOV Support If system has SR-IOV capable PCIe Devices, this option enables or disables Single Root IO Virtualization Support. Press [Enter] for configuration of advanced items. PCI Express Settings BIOS Setup - 52 - 2-2-2-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ordering feature. Wnen this feature is enabled, the system will allow device to use 8-bit Tag field as a requester. Set maximum playload for PCI Express Device or allow system BIOS to select the value. Options available: Auto/128 Bytes/256 Bytes/512 Bytes/1024 Bytes/2048 Bytes/4096 Bytes. Default setting is Auto. Extended Tag No Snoop Maximum Playload PCI Express Link Register Settings Extended Synch Link Training Retry Wnen this feature is enabled, the system will allow generation of Extended Synchronization patterns. Default setting is Disabled. Define the number of Retry Attempts software wil take to retrain the link if previous training attempt was unsuccessful. Press <+> / <-> keys to increase or decrease the desired values. - 53 - BIOS Setup Link Training Timeout (us) Define the number of Microseconds software will wait before polling 'Link Training' bit in Link Status register. Press <+> / <-> keys to increase or decrease the desired values. When this item is set to 'Disable Link, the system will operate power save feature for those unpopulated PCI Express links. Default setting is Keep Link ON. Unpopulated Links BIOS Setup - 54 - 2-2-3 Network Stack Network stack Enable/Disable UEFI network stack. Press <+> / <-> keys to increase or decrease the desired values. Press <+> / <-> keys to increase or decrease the desired values. Ipv4 PXE Support(Note) Ipv6 PXE Support(Note) PXE boot wait time(Note) Media detect time(Note) (Note) This item appears when Network Stack is set to Enabled. - 55 - BIOS Setup 2-2-4 CSM Configuration Compatibility Support Module Configuration CSM Support Enable/Disable Compatibility Support Module (CSM) support. Always: Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Enabled: Allowed headless retry boot Options available: Enabled/Disabled. Default setting is UEFI and Legacy. CSM16 Module Version Gate20 Active Option ROM Messages INT19 Endless Retry Boot option filter BIOS Setup - 56 - Option ROM execution Network Controls the execution UEFI and Legacy PXE OpROM. [. . . ] If you are using low-speed memory chips or other kinds of low-performance components and you choose to load these settings, the system might not function properly. Options available: Yes/No. BIOS Setup - 118 - Boot Override UEFI: Built-in in EFI Shell Press Enter to configure the device as the boot-up drive. Press <Enter> on this item to Launch EFI Shell from filesystem device. - 119 - BIOS Setup 2-8 BIOS Beep Codes # of Beeps 5 Memory error during POST. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE MD70-HB0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE MD70-HB0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.