User manual GIGABYTE GA-Z97X-UD7 TH

[. . . ] 1001 12ME-Z97XU7T-1001R Motherboard GA-Z97X-UD7 TH Motherboard GA-Z97X-UD7 TH May. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] If the OS does not provide support, all sharable ports won't work. Disabled  USB 3. 0 ports are routed to the EHCI controller and the xHCI controller is turned  The off. All USB 3. 0 devices function as High Speed devices regardless of xHCI software support/availability. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. (Default: Enabled) Allows you to set the onboard graphics memory size. (Default: 64M) && XHCI Mode && Audio Controller && Audio LED && Intel Processor Graphics && Intel Processor Graphics Memory Allocation && DVMT Total Memory Size Allows you to allocate the DVMT memory size of the onboard graphics. (Default: MAX) && Intel(R) Rapid Start Technology Enables or disables Intel® Rapid Start Technology. (Default: Enabled) && Legacy USB Support && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) - 58 - BIOS Setup && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Displays a list of connected USB mass storage devices. Set to Enabled to ensure proper device functionality when chaining two KVM switches. (Default: Disabled) && USB Storage Devices && Two Layer KVM Switch && PCIE Slot Configuration (CPU) Specifies the operating bandwidth for the PCIEX4 slot. Auto  L  ets the BIOS automatically configure this setting depending on the expansion card being installed. (Default) x4  PCIEX4 operates at x4 mode. `` SATA Configuration && Integrated SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. Enables or disables SATA Express SRIS (Separate Reference Clocks with Independent SSC) mode. (Default: Disabled) - 59 BIOS Setup && SATA Express SRIS capabilities `` Serial ATA Port 0/1/2/3/4/5 && Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled) Enables or disable the hot plug capability for each SATA port. (Default: Disabled) Enables or disables support for external SATA devices. (Default: Disabled) && Hot plug && External SATA `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port. (Default: Enabled) && Serial Port A `` Intel(R) Smart Connect Technology && ISCT Support Enables or disables Intel® Smart Connect Technology. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. Appendix - 122 - FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]