User manual GIGABYTE GA-Z97X-SOC FORCE LN2

[. . . ] 1001 12ME-Z97SLN2-1001R Motherboard GA-Z97X-SOC Force LN2 Motherboard GA-Z97X-SOC Force LN2 May 29, 2014 May 29, 2014 Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] (Default) Legacy Only  Allows booting from operating systems that only support legacy Option ROM. UEFI Only  Allows booting from operating systems that only support UEFI Option ROM. Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled) This item is configurable only when CSM Support is set to Always. && LAN PXE Boot Option ROM && Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. This item is configurable only when CSM Support is set to Always. (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website. - 57 BIOS Setup && Other PCI Device ROM Priority && Network stack Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. (Default) This item is configurable only when CSM Support is set to Always. Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. Press <Enter> on this item, type the password, and then press <Enter>. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. Differing from the user password, the administrator password allows you to make changes to all BIOS settings. Press <Enter> on this item, type the password, and then press <Enter>. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. However, the user password only allows you to make changes to certain BIOS settings but not all. && Ipv4 PXE Support && Ipv6 PXE Support && Administrator Password && User Password To cancel the password, press <Enter> on the password item and when requested for the password, enter the correct one first. When prompted for a new password, press <Enter> without entering any password. Press <Enter> again when prompted to confirm. BIOS Setup - 58 - 2-6 Peripherals && Initial Display Output && XHCI Mode Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card or the onboard graphics. PCIe 1 Slot  Sets the graphics card on the PCIEX16 slot as the first display. (Default) PCIe 2 Slot  Sets the graphics card on the PCIEX4_1 slot as the first display. PCIe 3 Slot  Sets the graphics card on the PCIEX8 slot as the first display. PCIe 4 Slot  Sets the graphics card on the PCIEX4_2 slot as the first display. PCI  Sets the graphics card on the PCI slot as the first display. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. - 115 - Appendix FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]