User manual GIGABYTE GA-Z170X-GAMING G1

[. . . ] 1001 12ME-Z17XGG1-1001R For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment. Motherboard GA-Z170X-Gaming G1 Motherboard GA-Z170X-Gaming G1 Jul. 24, 2015 Wireless Module Country Approvals: See the latest safety and regulatory documents at GIGABYTE's website. Copyright © 2015 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. [. . . ] (Default: Auto) && Device Select `` Intel(R) Bios Guard Technology Enables or disables the Intel® BIOS Guard feature, which protects the BIOS from malicious attacks. `` SATA Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) - 63 BIOS Setup && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Enabled) Enables or disable the hot plug capability for each SATA port. (Default: Disabled) Enables or disables support for external SATA devices. (Default: Disabled) && Port 0/1/2/3/4/5 && Hot plug && External SATA `` NVMe Configuration Displays information on your M. 2 NVME PCIe SSD if installed. BIOS Setup - 64 - 2-7 Chipset && VT-d (Note) Enables or disables Intel® Virtualization Technology for Directed I/O. (Default: Disabled) Enables or disables the onboard graphics function. (Default: Enabled) Allows you to set the onboard graphics memory size. (Default: 64M) && Internal Graphics && DVMT Pre-Allocated && DVMT Total Gfx Mem && Audio Controller Allows you to allocate the DVMT memory size of the onboard graphics. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. (Default: Disabled) && Audio DSP && High Precision Timer Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled) (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website. - 65 BIOS Setup 2-8 Power Management && AC BACK Determines the state of the system after the return of power from an AC power loss. (Default)  The Always On  The system is turned on upon the return of the AC power. Memory  The system returns to its last known awake state upon the return of the AC power. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.  Password  Set a password with 1~5 characters to turn on the system. Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept. When prompted for the password, press <Enter> again without entering the password to clear the password settings. [. . . ] priority users) U of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le guide d'utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) es dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) e gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 l MHz doit se conformer à la limite de p. i. r. e. ; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p. i. r. e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv)  e plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont D désignés utilisateurs principaux (c. -à-d. , qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. [. . . ]