User manual GIGABYTE GA-X99-SLI

[. . . ] 1001 12ME-X99SLI-1001R Motherboard GA-X99-SLI Motherboard GA-X99-SLI Apr. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] Allows you to set the PWM thermal protection threshold for the CPU VRIN. (Default: Auto) Allows you to set the PWM frequency for Channel A and Channel B memory. (Default: Auto) Allows you to set the PWM frequency for Channel C and Channel D memory. (Default: Auto) Allows you to automatically change the PWM phase according to the CPU load. The power-saving levels are (from lowest to highest): eXm Perf (Extreme Performance ), High Perf (High Performance), Perf (Performance), Balanced, Mid PWR (Mid Power), and Lite PWR (Light Power). (Default: Auto) Determines whether to allow memory voltage to drop to a power-saving level when the system is in S3 state. (Default: Disabled) - 49 BIOS Setup && DDR CH(A/B) Current Protection && DDR CH(C/D) Current Protection && CPU VRIN PWM Thermal Protection && CPU VRIN PWM Switch Rate && DDR CH(A/B) PWM Switch Rate && DDR CH(C/D) PWM Switch Rate && PWM Phase Control && S3 Save Mode `` CPU Core Voltage Control `` Chipset Voltage Control `` DRAM Voltage Control This section provides CPU voltage control options. This section provides Chipset voltage control options. This section provides memory voltage control options. `` PC Health Status BIOS Setup - 50 - && Reset Case Open Status Disabled  Keeps or clears the record of previous chassis intrusion status. (Default) Enabled   Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. && Case Open && CPU Vcore/CPU VRIN/CPU VCCIO/DRAM Channel A/B Voltage/DRAM Channel C/D Voltage/DDRVPP Channel A/B Voltage/DDRVPP Channel C/D Voltage/+5V/PCH IO/PCH Core/+12V Displays the current system voltages. && CPU/PCH Temperature Displays current CPU/Chipset temperature. Displays current system temperatures detected by the system temperature sensors on the motherboard. Displays current CPU/CPU_OPT/system fan speeds. && 1st System Temperature/2nd System Temperature && CPU/CPU OPT/System Fan Speed && CPU/System (SYS_FAN1~ SYS_FAN2)/PCH Temperature Warning Sets the warning threshold for CPU/system/Chipset temperature. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF. Allows the system to emit warning sound if the fan is not connected or fails. (Default: Disabled) Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal   Allows the fan to run at different speeds according to the CPU temperature. You can adjust the fan speed with System Information Viewer based on your system requirements. Manual  Allows you to control the fan speed under the Fan Speed Percentage item. This item is configurable only when CPU Fan Speed Control is set to Manual. Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal   Allows the fan to run at different speeds according to the CPU temperature. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. Appendix - 82 - FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]