User manual GIGABYTE GA-H110M-S2

[. . . ] 1002 GA-H110M-S2 GA-H110M-S2 DDR3 For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment. Motherboard GA-H110M-S2 Motherboard GA-H110M-S2 Nov. 5, 2015 Motherboard GA-H110M-S2 DDR3 Motherboard GA-H110M-S2 DDR3 Sept. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. [. . . ] (Default: Auto) Allows you to determine whether to enable voltage optimization to reduce power consumption. (Default: Enabled) Allows you to determine whether to automatically lower the CPU turbo ratio if the CPU voltage/temperature is too high. (Default: Enabled) Allows you to determine whether to enable hardware prefetcher to prefetch data and instructions from the memory into the cache. (Default: Enabled) Allows you to determine whether to enable the adjacent cache line prefetch mechanism that lets the processor retrieve the requested cache line as well as the subsequent cache line. (Default: Enabled) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website. - 21 - && CPU Enhanced Halt (C1E) (Note) && C3 State Support (Note) && C6/C7 State Support (Note) && C8 State Support (Note) && Package C State Limit (Note) && CPU Thermal Monitor (Note) && CPU EIST Function (Note) && Voltage Optimization && RSR && Hardware Prefetcher && Adjacent Cache Line Prefetch (Note) && System Memory Multiplier Allows you to set the system memory multiplier. (Default: Auto) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings. && Memory Frequency (MHz) `` Advanced Memory Settings && System Memory Multiplier, Memory Frequency(MHz) The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu. (Default) Enable Fast Boot  kip memory detection and training in some specific criteria for faster memory  S boot.  && Memory Boot Mode (Note) && Memory Enhancement Settings Provides several memory performance enhancement settings: Normal (basic performance), Relax OC, Enhanced Stability, and Enhanced Performance. (Default: Normal) Manual and Advanced Manual allows the Memory Multiplier Tweaker, Channel Interleaving, Rank Interleaving, and memory timing settings below to be configurable. (Default: Auto) && Memory Timing Mode && Profile DDR Voltage && Memory Multiplier Tweaker && Channel Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. (Default: Auto) && Rank Interleaving `` IMC Timing Settings This sub-menu provides options for tuning memory compatibility and stability. `` Channel A/B Memory Sub Timings This sub-menu provides memory timing settings for each channel of memory. The respective timing setting screens are configurable only when Memory Timing Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. (Note) This item is present only when you install a CPU and a memory module that support this feature. - 22 - `` Advanced Voltage Settings `` Advanced Power Settings && CPU Vcore Loadline Calibration Allows you to configure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically configure this setting and sets the voltage following Intel®'s specifications. (Default: Auto) Allows you to configure Load-Line Calibration for the CPU VAXG voltage. [. . . ] To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your "end of life" product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals. Waste Electrical & Electronic Equipment (WEEE) Directive Statement GIGABYTE will fulfill the national laws as interpreted from the 2002/96/EC WEEE (Waste Electrical and Electronic Equipment) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. [. . . ]