User manual GIGABYTE GA-C1037UN-EU

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIGABYTE GA-C1037UN-EU. We hope that this GIGABYTE GA-C1037UN-EU user guide will be useful to you.


GIGABYTE GA-C1037UN-EU : Download the complete user guide (10617 Ko)

You may also download the following manuals related to this product:

   GIGABYTE GA-C1037UN-EU (10474 ko)
   GIGABYTE GA-C1037UN-EU (10255 ko)
   GIGABYTE GA-C1037UN-EU ANNEXE 1 (9500 ko)
   GIGABYTE GA-C1037UN-EU ANNEXE 1 (9459 ko)

Manual abstract: user guide GIGABYTE GA-C1037UN-EU

Detailed instructions for use are in the User's Guide.

[. . . ] 1001 12ME-C1037EU-1001R Motherboard GA-C1037UN-EU Motherboard GA-C1037UN-EU Oct. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. [. . . ] When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated. (Default: Auto) Enables or disables Enhanced Intel® SpeedStep Technology (EIST). Depending on CPU loading, Intel® EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. (Default: Auto) && System Memory Multiplier && Memory Frequency (MHz) Allows you to set the system memory multiplier. (Default: Auto) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings. `` Advanced Memory Settings &&  ystem Memory Multiplier, Memory Frequency(MHz) S && Performance Enhance The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu. (Default) Extreme  Lets the system operate at its best performance level. Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings below to be configurable. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. (Default: Auto) && DRAM Timing Selectable && Channel Interleaving && Rank Interleaving `` Channel A/B Timing Settings This sub-menu provides memory timing settings for each channel of memory. The respective timing setting screens are configurable only when DRAM Timing Selectable is set to Quick or Expert. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. `` Advanced Voltage Settings `` PC Health Status && Reset Case Open Status This sub-menu allows you to set memory voltage. Disabled Keeps or clears the record of previous chassis intrusion status. (Default)  Enabled   Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. - 19 - && Case Open && CPU Vcore/Dram Voltage/+5V/+12V/CPU VTT Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. Displays the current system voltages. && CPU/System Temperature && CPU/System FAN Speed Displays current CPU/system temperature. Displays current CPU/system fan speed. && System Fan Speed Control && Slope PWM Allows you to determine whether to enable the system fan speed control function and adjust the fan speed. Normal   Allows the system fan to run at different speeds according to the system temperature. You can adjust the fan speed with EasyTune based on your system requirements. Manual Allows you to control the system fan speed under the Slope PWM item. This item is configurable only when System Fan Speed Control is set to Manual. [. . . ] If your system becomes unstable and you have loaded the BIOS default settings, you can use this function to load the BIOS settings from a profile created before, without the hassles of reconfiguring the BIOS settings. First select the profile you wish to load and then press <Enter> to complete. You can select Select File in HDD/USB/FDD to input the profile previously created from your storage device or load the profile automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked properly (last known good record). && Load Profiles Chapter 3 Drivers Installation •• Before installing the drivers, first install the operating system. (The following instructions use Windows 8 as the example operating system. ) •• After installing the operating system, insert the motherboard driver disk into your optical drive. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-C1037UN-EU




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-C1037UN-EU will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.