User manual GIGABYTE GA-990XA-UD3 R5

[. . . ] 1001 12ME-990X3R5-1001R Motherboard GA-990XA-UD3 R5 Motherboard GA-990XA-UD3 R5 Feb. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] (Default) Never  Disables UEFI CSM and supports UEFI BIOS boot process only. This item is configurable only when OS Type is set to Windows 8 or Windows 8 WHQL. UEFI and Legacy Allows booting from operating systems that support legacy option ROM or UEFI option ROM. (Default) Legacy Only  Allows booting from operating systems that only support legacy Option ROM. UEFI Only  Allows booting from operating systems that only support UEFI Option ROM. Allows you to decide whether to enable the legacy option ROM for the LAN controller. (Default: Disabled) This item is configurable only when CSM Support is set to Always. && Boot Mode Selection && LAN PXE Boot Option ROM && Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. (Default) Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. This item is configurable only when Network stack is enabled. && Other PCI Device ROM Priority && Network stack && Ipv4 PXE Support && Ipv6 PXE Support && Administrator Password Allows you to configure an administrator password. Press <Enter> on this item, type the password, and then press <Enter>. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. Differing from the user password, the administrator password allows you to make changes to all BIOS settings. - 45 - BIOS Setup && User Password Allows you to configure a user password. Press <Enter> on this item, type the password, and then press <Enter>. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. However, the user password only allows you to make changes to certain BIOS settings but not all. To cancel the password, press <Enter> on the password item and when requested for the password, enter the correct one first. When prompted for a new password, press <Enter> without entering any password. NOTE: Before setting the User Password, be sure to set the Administrator Password first. BIOS Setup - 46 - 2-6 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express graphics card. PCIe 1 Slot  Sets the PCI Express graphics card on the PCIEX16 slot as the first display. (Default) PCIe 2 Slot  Sets the PCI Express graphics card on the PCIEX8 slot as the first display. PCIe 3 Slot  Sets the PCI Express graphics card on the PCIEX4 slot as the first display. PCI 1 Slot  Sets the PCI graphics card on the PCI1 slot as the first display. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. - 85 - Appendix FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]