User manual GIGABYTE GA-8VD667K

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to up date the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] Disable onboard Serial port 2. - 39 - BIOS Setup English C UARTMode Select MThis feature allows you to determine which Infra Red(IR) function of Onboard I/O chip) 8ASKIR 8IrDA 8Normal Set onboard I/O chip UART to ASKIR Mode. (Default Value) C UR2 Duplex Mode(When UART Mode Select i s set [ASKIR or IrDA or SCR]) MThis feature allows you to select the IR modes. (Default Value) IR Function Duplex Full. C Onboard Parallel port MThis feature allows you to select from a given set of param eters if the parallel port uses the onboard I/O controller. 8378/IRQ7 8278/IRQ5 8Disabled 83BC/IRQ7 Enable onboard LPT port and address is 378/IRQ7. Enable onboard LPT port and address is 3BC/IRQ7. CParallel Port Mode MThis feature allows you to connect with an advanced print via the port mode it supports. 8SPP 8EPP 8ECP 8ECP+EPP Using Parallel port as Standard Parallel Port. Using Parallel port as ECP & EPP mode. CECP Mode Use DMA(When Parallel Port Mode is set [ECP or ECP+EPP]) 83 81 Set ECP Mode Use DMA to 3. (Default Value) Set ECP Mode Use DMA to 1. CGame Port Address 8201 8209 8Disabled Set Game Port Address to 201. Disable this function. GA-8VD667K Motherboard - 40 - English CMidi Port Address 8300 8330 8Disabled Set Midi Port Address to 300. Set Midi Port Address to 330. (Default Value) Disable this function. CMidi Port IRQ 85 810 Set Midi Port IRQ to 5. (Default Value) GA-8VD667K Motherboard - 41 - English Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Power Management Setup ACPI Suspend Type Power LED in S1 State Soft-Off by PWR_BTTN PM E Event Wake Up ModemRingOn Resume by Alarm x Date (of Month) Alarm x Time (hh:nn:ss) Alarm Power On By M ouse Power On By Keyboard x KB Power ON Password AC Back Function S1(POS) Blinking Instant-Off Enabled Enabled Disabled Everyday 000 Disabled Disabled Enter Soft-Off [S3] Set suspend type to Suspend to RAM under ACPI OS Set suspend type to Power On Suspend under ACPI OS Menu Level u [S1] Item Help higf: M ove Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults Figure 5: Power Management Setup F1:General Help F7:Optimized Defaults C ACPI Suspend Type This option will not be shown or not be available if you are using a CPU with the locked ratio. 8S1(POS) 8S3(STR) Set ACPI suspend type to S1. (Default Value) Set ACPI suspend type to S3. C Power LED in S1 State 8Blinking 8Dual/Off In standby mode(S1), power LED will blink. If use dual color LED, power LED will turn to another color. - 42 - BIOS Setup English C Soft-off by PWR_BTTN 8Instant-off Press power button then Power off instantly. Enter suspend if button is pressed less than 4 sec. C PMEEvent Wake Up MWhen set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state. MThis feature requires an ATX power supply that provides at least 1A on the +5VSB lead. (Default Value) C ModemRingOn MAn incom ing call via modem awakes the system from its soft-off mode. 8Disabled 8Enabled Disable this function. (Default Value) C Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to power on system. (Default Value) Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. Date ( of Month) Alarm : Time ( hh: mm: ss) Alarm : Everyday, 1~31 (0~23) : (0~59) : (0~59) C Power On By Mouse 8Disabled 8Mouse Click Disabled this function. (Default value) Double click on PS/2 mouse left button. GA-8VD667K Motherboard - 43 - C Power On By Keyboard his feature allows you to set the method for powering-on the system. The option " Password"allows you to set up to 5 alphanumeric characters to power-on the system. The option " Keyboard 98"allows you to use the standard keyboard 98 to power on the system. 8Password 8Disabled 8Keyboard 98 Enter from 1 to 5 characters to set the Keyboard Power On Password. [. . . ] Click each item to install the driver to install the drivers automatically. manually or switch to the The "Xpress Install" uses the"Click and Forget" technology to install the drivers automatically. Just select the drivers you want then click the "GO" button. The will finish the installation for you automatically. Massage: Some device drivers will restart your system automatically. [. . . ]