User manual GIGABYTE GA-8SIML

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to up date the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] (Default Value) Enable onboard Serial port A and using daddress 2F8 , IRQ3. Disable onboard Serial port A. - 35 - BIOS Setup English C Onboard Serial Port B 8Auto 83F8/IRQ4 82F8/IRQ3 83E8/IRQ4 82E8/IRQ3 8Disabled BIOS w ill automatically setup the port B address. Enable onboard Serial port B and using daddress Enable onboard Serial port B and using daddress Enable onboard Serial port B and using daddress Enable onboard Serial port B and using daddress Disable onboard Serial port B. IRQ3. C Serial Port B Mode (This item allows you to select the IR modes if the serial port B is used as an IR port. Set at Normal , if you use COM2 as the serial port as the serial port, instead as an IR port. ) 8ASKIR 8IrDA 8Normal Set onboard I/O chip UART to ASKIR Mode. (Default Value) C OnBoard Parallel port This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/ O controller. 8378/IRQ7 8278/IRQ5 83BC/IRQ7 8Disabled Enable On Board LPT port and using address 378, IRQ7. (Default Value) Enable On Board LPT port and using address 278, IRQ5. Disable onboard Parallel port. C Parallel Port Mode This feature allows you to connect with an advanced print via the port mode it supports. 8SPP 8EPP 8ECP 8ECP+EPP Using Parallel port as Standard Parallel Port. Using Parallel port as Ex tended Capabilities Port. (Default Value) Using Parallel port as ECP & EPP mode. C EPP Vers ion This feature allows you to select the EPP type version. 8EPP 1. 9 8EPP 1. 7 Compliant w ith EPP 1. 9 v ersion. Compliant w ith EPP 1. 7 v ersion. (Default Value) GA-8SIML Motherboard - 36 - C Parallel Port DMA This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected. 83 81 Set Parallel Port DMA to 3. (Default Value) Set Parallel Port DMA to 1. English C OnBoard Game Port This feature allows you to select the game port address or disable it. 8Disabled 8201h 8209h Disable OnBoard Game Port. (Default Value) Set OnBoard Game Port to 209h. C OnBoard Midi Port This feature allows you to select the Midi port address or disable it. 8Disabled 8300h 8330h 8290h Disable onboard Midi Port. (Default Value) Set onboard Midi Port to 290h. C Midi IRQ Select This feature allows you to select Midi IRQ is enabled. 8IRQ 5 / 10 (Default Value:10) - 37 - BIOS Setup English Power Management Setup CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are Pow er Management Setup ACPI Suspend Ty pe MODEM Use IRQ Soft-Off by Pow er Button Sy stem After AC Back IRQ [3-7, 9-15], NMI ModemRingOn/WakeOnLan PME Ev ent Wake Up USB Dev ice Wake-up From S3 Pow er On by Key board Pow er On by Mouse Resume by Alarm x Month Alarm x Day (of Month) x Time (hh:nn:ss) higf: Mov e [S1(POS)] [AUTO] [Off] [Off] [Enabled] [Enabled] [Disabled] [Disabled] [Passw ord] [Disabled] [Disabled] NA 0 000 Enter:Select +/-/PU/PD:Value F10:Sav e ESC:Ex it F1:General Help Item Help Menu Lev el u F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 6: Pow er Management Setup C ACPI Suspend Type 8S1(POS) 8S3(STR) Set ACPI suspend ty pe to S1. (Default Value) Set ACPI suspend ty pe to S3. C MODEM Use IRQ 8AUTO 83 84 85 87 Set MODEM Use IRQ to Auto. Set MODEM Use IRQ to 7. GA-8SIML Motherboard - 38 - 89 810 811 Set MODEM Use IRQ to 9. Set MODEM Use IRQ to 11. English C Soft-off by Power Button 8Off The user press the pow er button once, he can turn off the sy stem. (Default Value) 8Suspend The user press the pow er button once, then he can enter suspend mode. C System after AC Back 8Last State When AC-pow er back to the sy stem, the sy stem w ill return to the Last state before AC-pow er off. 8Off When AC-pow er back to the sy stem, the sy stem w ill be in "Off" state. (Default Value) 8On When AC-pow er back to the sy stem, the sy stem w ill be in "On" state. C IRQ [3-7, 9-15], NMI 8Disabled 8Enabled Disable this function. (Default v alue) C ModemRingOn/WakeOnLAN An incoming call via modem awakes the system from its soft-off mode. /When set at Enabled, an input signal comes from the other client/server on the LAN awarks the system from a soft off state if connected over LAN. 8Disabled 8Enabled Disable Modem Ring on/w ake on Lan function. (Default Value) C PME Event Wake UP When set at Enabled, any PCI-PM event awarkes the system from a PCI-PM controlled state 8Disabled 8Enabled Disable this function. (Default Value) Enable PME Ev ent Wake up. (Default Value) - 39 - BIOS Setup English C USB Device Wake-up From S3 When set at Enabled, it allows USB Device to activate the system from ACPI S3 power saving mode. 8Enabled 8Disabled Enable USB Dev ice Wakeup. (Default Value) C Power On by Keyboard 8Passw ord Input passw ord (from 1 to 8 characters) and press Enter to set the Key board Pow er On Passw ord. C Power On by Mouse 8Enabled 8Disabled Enable PS2 Mouse Pow er Up Control function. (Default Value) Disable this function. C Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to pow er on sy stem. (Default Value) Enable alarm function to POWER ON sy stem. If RTC Alarm Lead To Pow er On is Enabled. [. . . ] Then type the "BIOS flash utility" and "BIOS file" after A:\>. In this case you have to type "A:\> Flash841 7VTX. F4" and then press "Enter". Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 7VTX. F4 FLASH841. EXE 3 file(s) 838, 954 bytes 0 dir(s) 324, 608 bytes free English A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. Press "Enter", the highlighted item will locate on the model name of the right-upper screen. [. . . ]