User manual GIGABYTE GA-8LS533-C

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] IDE1 Conductor Cable !Auto !ATA66/100 !ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). !IDE2 Conductor Cable !Auto !ATA66/100 !ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). !USB Keyboard Support !Disabled !Enabled Disable USB Keyboard Support. (Default Value) Disable this function. GA-8LS533 Series Motherboard - 36 - !Onboard LAN Boot ROM* !Disabled !Enabled Disabled onboard LAN Boot ROM function. Onboard Serial Port 1 !Disabled !3F8/IRQ4 !2F8/IRQ3 !3E8/IRQ4 !2E8/IRQ3 !Auto Disable onboard Serial port 1. Onboard Serial Port 2 !Disabled !3F8/IRQ4 !2F8/IRQ3 !3E8/IRQ4 !2E8/IRQ3 !Auto Disable onboard Serial port 2. UART Mode Select This item allows you to determine which Infra Red(IR) function of Onboard I/O chip !Normal !IrDA !ASKIR Set onboard I/O chip UART to Normal Mode. (Default Value) * Only for GA-8LS533. - 37 BIOS Setup English !Onboard Parallel port !Disabled !378/IRQ7 !278/IRQ5 !3BC/IRQ7 Disable onboard LPT port. Parallel Port Mode !SPP !EPP !ECP !ECP+EPP Using Parallel port as Standard Parallel Port. Set Midi Port Address to 330. (Default Value) Set Midi Port Address to 300. !(Default Value) GA-8LS533 Series Motherboard - 38 - English Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Power Management Setup ACPI Suspend Type Power LED in S1 State Soft-Off by PWR_BTTN PME Event Wake Up ModemRingOn Resume by Alarm x Date (of Month) Alarm x Time (hh:mm:ss) Alarm Power On By Mouse Power On By Keyboard x KB Power ON Password AC Back Function [S1(POS)] [Blinking] [Instant-Off] [Enabled] [Enabled] [Disabled] Everyday 0:0:0 [Disabled] [Disabled] Enter [Soft-Off] [S3] Set suspend type to Suspend to RAM under ACPI OS Menu Level & [S1] Set suspend type to Power On Suspend under ACPI OS Item Help "#$%: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults Figure 5: Power Management Setup F1:General Help F7:Optimized Defaults !ACPI Suspend Type This option will not be shown or not be available if you are using a CPU with the locked ratio. !S1(POS) !S3(STR) Set ACPI suspend type to S1. Power LED in S1 State !Blinking !Dual/Off In standby mode(S1), power LED will blink. If use dual color LED, power LED will turn to another color. - 39 - BIOS Setup English !Soft-off by PWR_BTTN !Instant-off Press power button then Power off instantly. Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to power on system. [. . . ] Click each item to install the driver manually or switch to the to install the drivers automatically. The "Xpress Install" uses the"Click and Forget" technology to install the drivers automatically. Just will finish the installation for select the drivers you want then click the "GO" button. After restarting your system the "Xpress Install" will continue to install other drivers. We recommend that you install all components in the list. - 73 - Appendix English Driver install finished !You have to reboot system ! Item Description n Intel Chipset Software Installation Utility Tell the operating system how the chipset components will be configured n Intel Application Accelerator Designed to improve performance of the storage sub-system and overall system performance n Intel Extreme Graphics Driver For Intel® 845G/GL/GE/PE/GV Chipsets n USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP n RealTek LAN Driver* Promise 10/100 LAN driver for 81XX series chips n RealTek ALC101A/201A/202/650 AC97 Codec Driver For Intel® ICH/ICH2/ICH4 AC97 audio n USB Driver Patch This patch driver can help you to resolve some USB device issue on XP n Intel/NEC USB 2. 0 Driver It is recommended that you use the Microsoft Windows update for the most updated driver for XP/2K * Only for GA-8LS533. GA-8LS533 Series Motherboard - 74 - SOFTWARE APPLICATION This page reveals the value-added software developed by Gigabyte and its worldwide partners. English n Gigabyte Windows Utilities Manager (GWUM) This utility can integrate the Gigabyte's applications in the system tray n Gigabyte Management Tool (GMT) A useful tool which can manage the computer via the network n EasyTune 4 Powerful utility that integrates the overclocking and hardware monitoring functions n DMI Viewer Windows based utility which is used to browse the DMI/SMBIOS information of the system n Face-Wizard New utility for adding BIOS logo n @BIOS Gigabyte windows flash BIOS utility n Acrobat e-Book Useful utility from Adobe n Acrobat Reader Popular utility from Adobe for reading . PDF file format documents n Norton Internet Security (NIS) Integrated utility which includes anti-virus, ads, etc. - 75 - Appendix English SOFTWARE INFORMATION This page list the contects of softwares and drivers in this CD title. HARDWARE INFORMATION This page lists all device you have for this motherboard. GA-8LS533 Series Motherboard - 76 - CONTACT US Contact us via the information in this page all over the world. ! [. . . ]